Tag Archives: oil-free vacuum pump

China high quality GWSP300 small vortex pump equipment leak detector single phase/three phase dry oilless oil-free electric air lab scroll vacuum pump vacuum pump for ac

Product Description

 

Product Description

GWSP Oil free Scroll Vacuum Pump

Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.

Basic informations:
1) Model: GWSP3

CALLE RIO TORMES NUM. 1, PLANTA 1. DERECHA, OFICINA 3, CHINAMFG /FUENLABRADA, 28947 Spain

Email:

[email protected]

vacuum pump

What Is the Impact of Altitude on Vacuum Pump Performance?

The performance of vacuum pumps can be influenced by the altitude at which they are operated. Here’s a detailed explanation:

Altitude refers to the elevation or height above sea level. As the altitude increases, the atmospheric pressure decreases. This decrease in atmospheric pressure can have several effects on the performance of vacuum pumps:

1. Reduced Suction Capacity: Vacuum pumps rely on the pressure differential between the suction side and the discharge side to create a vacuum. At higher altitudes, where the atmospheric pressure is lower, the pressure differential available for the pump to work against is reduced. This can result in a decrease in the suction capacity of the vacuum pump, meaning it may not be able to achieve the same level of vacuum as it would at lower altitudes.

2. Lower Ultimate Vacuum Level: The ultimate vacuum level, which represents the lowest pressure that a vacuum pump can achieve, is also affected by altitude. As the atmospheric pressure decreases with increasing altitude, the ultimate vacuum level that can be attained by a vacuum pump is limited. The pump may struggle to reach the same level of vacuum as it would at sea level or lower altitudes.

3. Pumping Speed: Pumping speed is a measure of how quickly a vacuum pump can remove gases from a system. At higher altitudes, the reduced atmospheric pressure can lead to a decrease in pumping speed. This means that the vacuum pump may take longer to evacuate a chamber or system to the desired vacuum level.

4. Increased Power Consumption: To compensate for the decreased pressure differential and achieve the desired vacuum level, a vacuum pump operating at higher altitudes may require higher power consumption. The pump needs to work harder to overcome the lower atmospheric pressure and maintain the necessary suction capacity. This increased power consumption can impact energy efficiency and operating costs.

5. Efficiency and Performance Variations: Different types of vacuum pumps may exhibit varying degrees of sensitivity to altitude. Oil-sealed rotary vane pumps, for example, may experience more significant performance variations compared to dry pumps or other pump technologies. The design and operating principles of the vacuum pump can influence its ability to maintain performance at higher altitudes.

It’s important to note that vacuum pump manufacturers typically provide specifications and performance curves for their pumps based on standardized conditions, often at or near sea level. When operating a vacuum pump at higher altitudes, it is advisable to consult the manufacturer’s guidelines and consider any altitude-related limitations or adjustments that may be necessary.

In summary, the altitude at which a vacuum pump operates can have an impact on its performance. The reduced atmospheric pressure at higher altitudes can result in decreased suction capacity, lower ultimate vacuum levels, reduced pumping speed, and potentially increased power consumption. Understanding these effects is crucial for selecting and operating vacuum pumps effectively in different altitude environments.

vacuum pump

Can Vacuum Pumps Be Used for Leak Detection?

Yes, vacuum pumps can be used for leak detection purposes. Here’s a detailed explanation:

Leak detection is a critical task in various industries, including manufacturing, automotive, aerospace, and HVAC. It involves identifying and locating leaks in a system or component that may result in the loss of fluids, gases, or pressure. Vacuum pumps can play a significant role in leak detection processes by creating a low-pressure environment and facilitating the detection of leaks through various methods.

Here are some ways in which vacuum pumps can be used for leak detection:

1. Vacuum Decay Method: The vacuum decay method is a common technique used for leak detection. It involves creating a vacuum in a sealed system or component using a vacuum pump and monitoring the pressure change over time. If there is a leak present, the pressure will gradually increase due to the ingress of air or gas. By measuring the rate of pressure rise, the location and size of the leak can be estimated. Vacuum pumps are used to evacuate the system and establish the initial vacuum required for the test.

2. Bubble Testing: Bubble testing is a simple and visual method for detecting leaks. In this method, the component or system being tested is pressurized with a gas, and then immersed in a liquid, typically soapy water. If there is a leak, the gas escaping from the component will form bubbles in the liquid, indicating the presence and location of the leak. Vacuum pumps can be used to create a pressure differential that forces gas out of the leak, making it easier to detect the bubbles.

3. Helium Leak Detection: Helium leak detection is a highly sensitive method used to locate extremely small leaks. Helium, being a small atom, can easily penetrate small openings and leaks. In this method, the system or component is pressurized with helium gas, and a vacuum pump is used to evacuate the surrounding area. A helium leak detector is then used to sniff or scan the area for the presence of helium, indicating the location of the leak. Vacuum pumps are essential for creating the low-pressure environment required for this method and ensuring accurate detection.

4. Pressure Change Testing: Vacuum pumps can also be used in pressure change testing for leak detection. This method involves pressurizing a system or component and then isolating it from the pressure source. The pressure is monitored over time, and any significant pressure drop indicates the presence of a leak. Vacuum pumps can be used to evacuate the system after pressurization, returning it to atmospheric pressure for comparison or retesting.

5. Mass Spectrometer Leak Detection: Mass spectrometer leak detection is a highly sensitive and precise method used to identify and quantify leaks. It involves introducing a tracer gas, usually helium, into the system or component being tested. A vacuum pump is used to evacuate the surrounding area, and a mass spectrometer is employed to analyze the gas samples for the presence of the tracer gas. This method allows for accurate detection and quantification of leaks down to very low levels. Vacuum pumps are crucial for creating the necessary vacuum conditions and ensuring reliable results.

In summary, vacuum pumps can be effectively used for leak detection purposes. They facilitate various leak detection methods such as vacuum decay, bubble testing, helium leak detection, pressure change testing, and mass spectrometer leak detection. Vacuum pumps create the required low-pressure environment, assist in evacuating the system or component being tested, and enable accurate and reliable leak detection. The choice of vacuum pump depends on the specific requirements of the leak detection method and the sensitivity needed for the application.

vacuum pump

How Are Vacuum Pumps Different from Air Compressors?

Vacuum pumps and air compressors are both mechanical devices used to manipulate air and gas, but they serve opposite purposes. Here’s a detailed explanation of their differences:

1. Function:

– Vacuum Pumps: Vacuum pumps are designed to remove or reduce the pressure within a closed system, creating a vacuum or low-pressure environment. They extract air or gas from a chamber, creating suction or negative pressure.

– Air Compressors: Air compressors, on the other hand, are used to increase the pressure of air or gas. They take in ambient air or gas and compress it, resulting in higher pressure and a compacted volume of air or gas.

2. Pressure Range:

– Vacuum Pumps: Vacuum pumps are capable of generating pressures below atmospheric pressure or absolute zero pressure. The pressure range typically extends into the negative range, expressed in units such as torr or pascal.

– Air Compressors: Air compressors, on the contrary, operate in the positive pressure range. They increase the pressure above atmospheric pressure, typically measured in units like pounds per square inch (psi) or bar.

3. Applications:

– Vacuum Pumps: Vacuum pumps have various applications where the creation of a vacuum or low-pressure environment is required. They are used in processes such as vacuum distillation, vacuum drying, vacuum packaging, and vacuum filtration. They are also essential in scientific research, semiconductor manufacturing, medical suction devices, and many other industries.

– Air Compressors: Air compressors find applications where compressed air or gas at high pressure is needed. They are used in pneumatic tools, manufacturing processes, air conditioning systems, power generation, and inflating tires. Compressed air is versatile and can be employed in numerous industrial and commercial applications.

4. Design and Mechanism:

– Vacuum Pumps: Vacuum pumps are designed to create a vacuum by removing air or gas from a closed system. They may use mechanisms such as positive displacement, entrapment, or momentum transfer to achieve the desired vacuum level. Examples of vacuum pump types include rotary vane pumps, diaphragm pumps, and diffusion pumps.

– Air Compressors: Air compressors are engineered to compress air or gas, increasing its pressure and decreasing its volume. They use mechanisms like reciprocating pistons, rotary screws, or centrifugal force to compress the air or gas. Common types of air compressors include reciprocating compressors, rotary screw compressors, and centrifugal compressors.

5. Direction of Air/Gas Flow:

– Vacuum Pumps: Vacuum pumps draw air or gas into the pump and then expel it from the system, creating a vacuum within the chamber or system being evacuated.

– Air Compressors: Air compressors take in ambient air or gas and compress it, increasing its pressure and storing it in a tank or delivering it directly to the desired application.

While vacuum pumps and air compressors have different functions and operate under distinct pressure ranges, they are both vital in various industries and applications. Vacuum pumps create and maintain a vacuum or low-pressure environment, while air compressors compress air or gas to higher pressures for different uses and processes.

vacuum_pumpvacuum_pump
editor by Dream 2024-12-06

China Good quality GWSP75 long time operation portable frezee dryer small oil free scroll vacuum pump vacuum pump ac system

Product Description

 

Product Description

GWSP Oil free Scroll Vacuum Pump

Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.

Basic informations:
1) Model: GWSP75 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 8.0Pa/0.08 mbar (abs.)
3) Max suction capacity: 50Hz-1.0L/s 60Hz-1.2L/s

Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
 

Technical Specifications

Technical Specifications:

  Model GWSP40 GWSP75 GWSP150 GWSP300 GWSP600 GWSP1000
  Pumping Speed 50Hz l/s 0.5 1.0  2.0  4.3 8.7 16.6
m3/h 1.8 3.6 7.2 15.5 31.3 59.8
cfm 1.1 2.1 4.3 9.3 18.7 35.8
60Hz l/s 0.6 1.2 2.4 5.1 10.4 20.0 
m3/h 2.2 4.3 8.6 18.3 37.4 71.6
cfm 1.3 2.5 5.1 10.9 22.3 42.8
  Ultimate Pressure Torr   ≤1.1*10-1   ≤6.0*10-2   ≤4.5*10-2   ≤1.9*10-2   ≤7.5*10-3   ≤7.5*10-3
psi   ≤2.2*10-3   ≤1.2*10-3   ≤9.0*10-4   ≤3.8*10-4   ≤1.5*10-4   ≤1.5*10-4
Pa   ≤15   ≤8   ≤6   ≤2.6   ≤1   ≤1
mbar   ≤1.5*10-1   ≤8.0*10-2   ≤6.0*10-2   ≤2.6*10-2   ≤1.0*10-2   ≤1.0*10-2
  Noise Level dB(A)   ≤54   ≤57   ≤57   ≤60   ≤61   ≤65
  Leakage mbar·l/s 1*10-7
  Max. Inlet/Exhaust Pressure MPa 0.1 / 0.13
  Ambient Operation Temp. ºF 41~104
  Motor 1 phase Power kW 0.25 0.55 0.55 0.55 0.75 —
Voltage V   110~115 (60Hz),200~230 (50Hz) —
Speed rpm 1425(50Hz),1725(60Hz) —
Plug   North America, Europe, UK/Ireland, India —
  Motor 3 phase Power kW — 0.55 0.55 0.55 0.75 1.5
Voltage V — 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz)
Speed rpm —      1425 (50Hz),1725 (60Hz)
  Inlet/Exhaust Flange   KF25/KF16 KF40/KF16 KF40/KF16*2
  Dimensions 1 phase mm 326*212*253 450*260*296 455*260*296 493*297*334 538*315*348 —
3 phase mm — 450*260*296 455*260*296 493*297*334 538*315*348 576*450*402
  Net Weight 1 phase kg 15 21 22 29 36 —
3 phase kg — 20 21 28 31 54
  Cooling Type   Air cooled
  Others   With air flush

Features & Benefits

Features & Benefits:

No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance
 

 

 

Quality Control

CMM inspection system assures
fixed tolarance on dimension&shape

Pump Testing

Applications

Analyzing instrument and device.
Spectroscopy/scHangZhou electron microscopy.
Space environment simulation machine.
Helium Leak detector.
Mass spectrometer.
Cryopump regeneration.
Accelerators/synchrotrons.

Food and drug industry.
Freezing dryer.
Vacuum storage.
Medical equipment
Low temperature plasma sterilizer.
Vacuum storage.
Dental equipment.

Vacuum equipment.
Oil free ultrahigh vacuum unit
Oil free vacuum unit

Company Profile

Company Profile
GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.

FAQ

Question&Answers
Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Years
Oil or Not: Oil Free
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

small vacuum pump

Are there any environmentally friendly options among small vacuum pumps?

Yes, there are environmentally friendly options among small vacuum pumps that aim to minimize their impact on the environment. These options are designed to be energy-efficient, reduce emissions, and use sustainable materials. Here are some eco-friendly aspects to consider when choosing small vacuum pumps:

1. Oil-Free Vacuum Pumps:

Oil-free vacuum pumps are considered more environmentally friendly than oil-lubricated pumps. They eliminate the need for oil changes and reduce the risk of oil contamination in the environment. Oil-free pumps are commonly used in laboratories, medical equipment, and industries with stringent environmental regulations.

2. Energy Efficiency:

Energy-efficient vacuum pumps consume less electricity, which not only reduces operating costs but also lowers greenhouse gas emissions associated with power generation. Look for pumps with high energy efficiency ratings, and consider those equipped with variable speed drives (VSDs) that adjust power consumption according to demand.

3. Noise Reduction:

Quieter vacuum pumps contribute to a more pleasant and less disruptive work environment. Low-noise pumps are designed with noise reduction features, making them suitable for noise-sensitive areas and minimizing noise pollution.

4. Longevity and Durability:

Vacuum pumps built to last have a longer service life, reducing the frequency of replacements and the associated environmental impact. Durable pumps also help reduce waste and resource consumption.

5. Sustainable Materials:

Some manufacturers prioritize the use of sustainable and recyclable materials in their pump designs. Check if a pump is made from environmentally friendly materials and if the manufacturer has sustainable practices in place.

6. Compliance with Environmental Standards:

Choose vacuum pumps that meet or exceed environmental standards and regulations, such as RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals). Compliance indicates a commitment to environmental responsibility.

7. Emission Reduction:

Certain vacuum pump technologies, like dry screw pumps, are designed to minimize emissions and ensure that no harmful substances are released into the atmosphere during operation.

8. Recycling and Disposal:

Consider the ease of recycling or disposing of a vacuum pump at the end of its life cycle. Some manufacturers provide recycling programs for their products, reducing the environmental impact of disposal.

When selecting an environmentally friendly small vacuum pump, it’s essential to research the manufacturer’s sustainability practices, review product specifications, and look for certifications that indicate eco-friendly features. Additionally, consider how the pump’s performance and efficiency align with your specific application needs while keeping environmental considerations in mind.

By choosing environmentally friendly vacuum pumps, you can reduce your carbon footprint, lower operating costs, and contribute to a more sustainable and responsible approach to vacuum technology.

small vacuum pump

What safety precautions should be followed when using small vacuum pumps?

Working with small vacuum pumps involves potential risks, and it’s crucial to follow safety precautions to protect personnel, equipment, and the environment. Here are important safety measures to consider when using small vacuum pumps:

1. Read the Manual:

Always read and thoroughly understand the manufacturer’s operating manual for the specific vacuum pump you are using. The manual provides essential information on safe operation, maintenance, and troubleshooting.

2. Proper Ventilation:

Ensure that the area where the vacuum pump is operated is well-ventilated. Some pumps may produce fumes, heat, or exhaust gases that need proper ventilation to dissipate. Adequate ventilation also helps prevent overheating.

3. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles, gloves, lab coats, or other protective clothing, depending on the nature of the materials or substances being handled and the risks involved.

4. Electrical Safety:

If the vacuum pump is electrically powered, ensure that the electrical connections and cords are in good condition. Use ground fault circuit interrupters (GFCIs) when working with electrical equipment in wet or damp environments.

5. Leak Detection:

Regularly check for vacuum system leaks using a leak detector or soapy water solution. Leaks can compromise the vacuum level and may release hazardous gases or vapors into the environment.

6. Gas Compatibility:

Verify that the vacuum pump and its components are compatible with the gases or substances being processed. Incompatible materials can lead to chemical reactions, contamination, or equipment damage.

7. Emergency Shut-Off:

Ensure that an emergency shut-off mechanism or switch is easily accessible. Familiarize yourself with its location and how to use it in case of an emergency or equipment malfunction.

8. Secure Positioning:

Properly secure the vacuum pump to prevent it from tipping over or falling during operation. Use mounting brackets or secure it to a stable surface as needed.

9. Training and Supervision:

Ensure that personnel operating the vacuum pump are adequately trained and supervised, especially in laboratory, industrial, or medical settings. Training should cover safe operation, emergency procedures, and equipment-specific protocols.

10. Pressure Relief:

Install pressure relief valves or mechanisms to prevent over-pressurization of the system. This is particularly important when handling gases or vapors that can generate excessive pressure.

11. Regular Maintenance:

Adhere to the recommended maintenance schedule for the vacuum pump. Proper maintenance helps prevent equipment failures and unsafe conditions.

12. Emergency Response:

Have an emergency response plan in place, including knowledge of how to shut down the vacuum pump and evacuate the area in case of a hazardous situation.

13. Labels and Signage:

Clearly label the vacuum pump and associated equipment with safety instructions, warnings, and hazard information. This helps remind users of proper procedures and potential risks.

Always prioritize safety when using small vacuum pumps, and be aware of the specific risks associated with your application. Following these precautions helps mitigate potential hazards and ensures the safe operation of the equipment.

small vacuum pump

What industries commonly rely on small vacuum pumps for their operations?

Small vacuum pumps play a crucial role in various industries, offering versatile solutions for a wide range of applications. Here are industries that commonly rely on small vacuum pumps for their operations:

1. Laboratory and Scientific Research:

Small vacuum pumps are essential in laboratories for applications such as vacuum filtration, rotary evaporation, freeze drying, and sample concentration. Scientific research in fields like chemistry, biology, and physics often relies on precise vacuum control.

2. Healthcare and Medical:

In the medical and healthcare industry, small vacuum pumps are used in devices like medical aspirators, wound care systems, and diagnostic equipment. They help create the necessary vacuum for procedures such as suctioning, wound drainage, and blood collection.

3. Manufacturing and Industrial Processes:

Manufacturing industries utilize small vacuum pumps in various processes, including vacuum packaging, degassing of liquids and resins, and handling of materials. Industries such as food processing, electronics, and plastics rely on vacuum technology for efficient production.

4. HVAC and Refrigeration:

In heating, ventilation, air conditioning (HVAC), and refrigeration systems, small vacuum pumps are used for evacuating and degassing refrigerant lines. This ensures optimal system performance and prevents issues like moisture contamination.

5. Automotive and Aerospace:

The automotive and aerospace industries use small vacuum pumps in applications like power brake boosters, emission control systems, and aircraft de-icing systems. These pumps play a crucial role in ensuring safety and performance in transportation equipment.

6. Environmental Monitoring and Analysis:

Environmental monitoring equipment, including air and water quality analyzers, often relies on small vacuum pumps for sample collection and analysis. They help ensure accurate data in environmental studies and compliance monitoring.

7. Semiconductor and Electronics:

In semiconductor manufacturing and electronics assembly, small vacuum pumps are used in vacuum pick-and-place systems, surface mount technology (SMT) equipment, and wafer handling. They contribute to precision and reliability in microelectronics production.

8. Research and Development:

Research and development efforts in various industries, including materials science, nanotechnology, and aerospace, rely on small vacuum pumps for experiments and prototyping. Vacuum chambers are commonly used in R&D to simulate specific environmental conditions.

9. Pharmaceuticals and Biotechnology:

The pharmaceutical and biotechnology industries use small vacuum pumps for processes such as filtration, lyophilization (freeze drying), and drug formulation. These pumps are critical for drug manufacturing and research.

10. Food and Beverage:

In the food and beverage industry, small vacuum pumps are used in vacuum packaging machines to extend the shelf life of perishable products. They help remove air from packaging, preventing spoilage and preserving freshness.

11. Energy and Power Generation:

Small vacuum pumps are used in power plants and energy facilities for applications like turbine sealing and transformer evacuation. They contribute to the efficiency and reliability of power generation systems.

These industries rely on small vacuum pumps to perform critical functions, enhance product quality, and optimize various processes. The versatility and efficiency of small vacuum pumps make them indispensable tools in modern industrial and scientific applications.

China Good quality GWSP75 long time operation portable frezee dryer small oil free scroll vacuum pump vacuum pump ac system China Good quality GWSP75 long time operation portable frezee dryer small oil free scroll vacuum pump vacuum pump ac system
editor by Dream 2024-05-16

China OEM HP Series 150 L/Min 1.34 HP 220V Smart Oil-Free Piston Vacuum Pump with Good quality

Product Description

Product Description

Piston Oil Free Air Compressor Vacuum pump

OverviewSuoto piston vacuum pump is compact, light and attractive in design. It uses the big starting torque and is specially designed for low temperature environment. It is guaranteed start normally in winter’s low temperature. It is applicable to vacuum packaging, vacuum freezing, automobile reparation, gas analysis, medicine mechanism, printing mechanism and other vacuum evacuations.
This kind of pump is widely used in food packaging, scientific research, medical treatment, electronics, chemicals, medicine and laboratory of universities and colleges.

 

Technical Specifications

Model

HP-295

Voltage

220V/50HZ; 110V/60HZ

Free air displacement

60L/min

Ultimate Vacuum

700mmHg

Power

325w

Dimension

250x110x180mm

Using the environment

5-40ºC

Voltage resistance strength

1600V/50HZ 1min No breakdown

N.W.

6.5KG

Detailed Photos

Packaging & Shipping

 

Packing Details  : One pump in One plywood case
Delivery Details : 30 days after order confirmation

Standard package without original wood, no fumigation needed.

 

Company Profile

ZheZheJiang oto Pump Industrial Co., Ltd. is a professional pump manufacturer integrating R&D, manufacturing, sales and service as a whole, which has been certified by ISO9001 international quality management system. 

Located in Xihu (West Lake) Dis.a Industrial Park, ZheJiang , CHINAMFG Pump Industrial possesses 2 manufacturing bases in ZheJiang and ZHangZhoug. Since our inception, CHINAMFG Pump Industrial has been committed to the innovation and development of various pumps. Our leading products include self-priming trash pump, centrifugal pump, submersible pump, diaphragm pump, vacuum pump, diesel pump, fire pump, etc.

 

 

FAQ

Q: Can I chat with you online? What is your company official website?
A: Yes. 

Q: What type of company CHINAMFG is? 
A: CHINAMFG is a manufacture and trading company, has factories in ZheJiang and ZHangZhoug, with export and import license.

Q: What kinds of pumps do you supply?
A: Our products including self-priming trash pump, centrifugal pump, diaphragm pump, submersible pump, chemical pump, oil pump, diesel pump, fire fighting pump, etc.

Q: What is your payment terms?
A: Alibaba Trade Assurance, Western Union, Paypal, T/T, L/C, etc.

Q: Can you provide OEM, ODM service?
A: Yes. We have factories in ZheJiang and ZHangZhoug, we can make products according to your requirements.

Q: Why should we buy from you?
A: We are committed to provide best quality products at minimum delivery time and competitive price. We believe this is what customer wants. We are satified until customers are.

Q: What is your warranty period?
A: We provide 1 year of unconditional warranty on our products for the manufacturing defects.

Q: What about delivery time?
A: Normally our production time is within 2 weeks. Please confirm before order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Acting Form: Single-Acting
Type: Centrifugal Pump
Displacement: Variable Pump
Performance: No Leak
Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Customization:
Available

|

small vacuum pump

Where can individuals or businesses source small vacuum pumps for various applications?

Individuals and businesses looking to source small vacuum pumps for a wide range of applications have several options to consider. Here are common sources for acquiring small vacuum pumps:

1. Manufacturers and Authorized Dealers:

Contacting the manufacturers directly or their authorized dealers is often a reliable way to purchase small vacuum pumps. Manufacturers typically offer a wide selection of models and provide technical support. Authorized dealers can assist with product selection and may offer competitive pricing.

2. Industrial Suppliers:

Industrial supply companies and distributors often carry a variety of vacuum pumps. These suppliers cater to a range of industries, including manufacturing, research, and laboratories. They can provide competitive pricing and may offer bulk purchase discounts.

3. Laboratory Equipment Suppliers:

For those seeking vacuum pumps for laboratory or scientific applications, specialized laboratory equipment suppliers are a valuable resource. They offer pumps designed for precise and controlled vacuum needs.

4. Online Marketplaces:

Online marketplaces like Amazon, eBay, and Alibaba feature a wide array of small vacuum pumps from various manufacturers and sellers. Buyers can compare prices, read reviews, and often find both new and used pumps.

5. HVAC and Refrigeration Suppliers:

Heating, ventilation, air conditioning, and refrigeration (HVAC/R) suppliers may carry vacuum pumps suitable for HVAC system maintenance and refrigeration applications. These suppliers are often found locally.

6. Scientific and Research Institutions:

Scientific and research institutions occasionally sell surplus equipment, including vacuum pumps, through online auctions or specialized surplus equipment vendors.

7. Rental Services:

For short-term or occasional use, renting small vacuum pumps can be a cost-effective option. Equipment rental companies may offer various pump types for temporary applications.

8. Online Manufacturer Websites:

Visiting the official websites of vacuum pump manufacturers provides access to comprehensive product information, specifications, and contact details for sales and support.

9. Trade Shows and Exhibitions:

Attending industry-specific trade shows, exhibitions, and conferences can be an excellent opportunity to connect with manufacturers, distributors, and suppliers in person. It allows for hands-on product evaluation and networking.

10. Classified Ads and Auctions:

Classified advertisement websites and auction platforms may feature used vacuum pumps for sale. Buyers should exercise caution and thoroughly assess the condition of used equipment.

When sourcing small vacuum pumps, individuals and businesses should consider factors such as the pump’s specifications, warranty, customer support, and the reputation of the supplier or seller. It’s essential to choose a source that aligns with the specific requirements of the application and ensures the reliability and performance of the vacuum pump.

small vacuum pump

What safety precautions should be followed when using small vacuum pumps?

Working with small vacuum pumps involves potential risks, and it’s crucial to follow safety precautions to protect personnel, equipment, and the environment. Here are important safety measures to consider when using small vacuum pumps:

1. Read the Manual:

Always read and thoroughly understand the manufacturer’s operating manual for the specific vacuum pump you are using. The manual provides essential information on safe operation, maintenance, and troubleshooting.

2. Proper Ventilation:

Ensure that the area where the vacuum pump is operated is well-ventilated. Some pumps may produce fumes, heat, or exhaust gases that need proper ventilation to dissipate. Adequate ventilation also helps prevent overheating.

3. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles, gloves, lab coats, or other protective clothing, depending on the nature of the materials or substances being handled and the risks involved.

4. Electrical Safety:

If the vacuum pump is electrically powered, ensure that the electrical connections and cords are in good condition. Use ground fault circuit interrupters (GFCIs) when working with electrical equipment in wet or damp environments.

5. Leak Detection:

Regularly check for vacuum system leaks using a leak detector or soapy water solution. Leaks can compromise the vacuum level and may release hazardous gases or vapors into the environment.

6. Gas Compatibility:

Verify that the vacuum pump and its components are compatible with the gases or substances being processed. Incompatible materials can lead to chemical reactions, contamination, or equipment damage.

7. Emergency Shut-Off:

Ensure that an emergency shut-off mechanism or switch is easily accessible. Familiarize yourself with its location and how to use it in case of an emergency or equipment malfunction.

8. Secure Positioning:

Properly secure the vacuum pump to prevent it from tipping over or falling during operation. Use mounting brackets or secure it to a stable surface as needed.

9. Training and Supervision:

Ensure that personnel operating the vacuum pump are adequately trained and supervised, especially in laboratory, industrial, or medical settings. Training should cover safe operation, emergency procedures, and equipment-specific protocols.

10. Pressure Relief:

Install pressure relief valves or mechanisms to prevent over-pressurization of the system. This is particularly important when handling gases or vapors that can generate excessive pressure.

11. Regular Maintenance:

Adhere to the recommended maintenance schedule for the vacuum pump. Proper maintenance helps prevent equipment failures and unsafe conditions.

12. Emergency Response:

Have an emergency response plan in place, including knowledge of how to shut down the vacuum pump and evacuate the area in case of a hazardous situation.

13. Labels and Signage:

Clearly label the vacuum pump and associated equipment with safety instructions, warnings, and hazard information. This helps remind users of proper procedures and potential risks.

Always prioritize safety when using small vacuum pumps, and be aware of the specific risks associated with your application. Following these precautions helps mitigate potential hazards and ensures the safe operation of the equipment.

small vacuum pump

How does the size of a vacuum pump affect its performance and capacity?

The size of a vacuum pump has a significant impact on its performance and capacity, and it is a crucial factor to consider when selecting a vacuum pump for a specific application. Here’s how size influences a vacuum pump’s characteristics:

1. Pumping Speed:

The pumping speed of a vacuum pump is a measure of how quickly it can remove gas from a vacuum chamber. Larger vacuum pumps typically have higher pumping speeds, meaning they can evacuate air from a volume more rapidly. This is especially important in applications where a quick vacuum is required, such as in industrial processes.

2. Ultimate Vacuum:

The ultimate vacuum level that a vacuum pump can achieve depends on its size and design. Larger pumps can typically attain lower pressures, making them suitable for applications that require a high vacuum, such as in semiconductor manufacturing or analytical instruments.

3. Flow Rate:

The size of a vacuum pump influences the volume of gas it can handle per unit of time. Larger pumps have higher flow rates and can process larger volumes of gas, which is essential in applications like vacuum drying and vacuum packaging.

4. Capacity for Gas Loads:

Some applications generate high gas loads due to outgassing or the need to maintain a specific pressure. Larger vacuum pumps have a greater capacity to handle these gas loads without a significant drop in vacuum level, ensuring stable and consistent performance.

5. Power Consumption:

Larger vacuum pumps may require more power to operate, which can impact energy costs. In contrast, smaller pumps are often more energy-efficient. Selecting the right size ensures that the pump matches the available power supply and budget constraints.

6. Footprint and Space Requirements:

The physical size of a vacuum pump affects the space it occupies. Smaller pumps are more compact and may be preferred when space is limited, such as in laboratory settings or mobile applications.

7. Noise Level:

Larger vacuum pumps can generate more noise due to their higher capacity and power requirements. Smaller pumps, on the other hand, tend to operate more quietly, making them suitable for applications where noise reduction is essential.

8. Maintenance and Serviceability:

The size of a vacuum pump can impact ease of maintenance. Smaller pumps may have simpler designs, leading to easier servicing and reduced downtime.

It’s crucial to choose a vacuum pump size that aligns with the specific requirements of your application. Oversized pumps can lead to unnecessary energy consumption and higher upfront costs, while undersized pumps may struggle to meet performance demands, leading to decreased efficiency.

Overall, the size of a vacuum pump should be carefully selected based on the application’s vacuum level, flow rate, and gas handling requirements to optimize performance and efficiency.

China OEM HP Series 150 L/Min 1.34 HP 220V Smart Oil-Free Piston Vacuum Pump with Good quality China OEM HP Series 150 L/Min 1.34 HP 220V Smart Oil-Free Piston Vacuum Pump with Good quality
editor by Dream 2024-05-16

China wholesaler Hot Sale Oil Free Scroll Vacuum Pump Factory vacuum pump belt

Product Description

hot sale Oil free scroll vacuum pump factory
 

Oil free scroll vacuum pump (LDVP1600)
 
Pumping speed 1.2/1.6 m3/min 
Rotate speed 2650/3000 r/min
power 2.2 kw 
ultimate vacuum Belt drive/Direct drive

Silent: Low noise & Low Vibration: Silent operation and low vibration assure comfortable and quiet work space.

Clean: Clean Air 100% Oil-Free:Air exhausted from oil-type compressors contain oil, moisture and dust. Oil-free type compressors can supply clean air.

Safe: Safe Backup Function:Even if 1 air end fails, another air end automatically replaces it by jump control. Unmanned operation at night has become easy.

Easy: Easy to use Controls:High quality microcomputer is mounted. Maintenance monitor digitally displays operating conditions, warnings and cautions. Automatic power failures and reset function can be dealt with easily.

Smart: Compact and Smart design:There are no extruding handles on the back of machine. Its simple design and reduced installation space required allows it to fit well in any office.

Environment: Energy Saving

Multi-stage Control: Plural air ends are built into 1 compressor. Multi-stage control system activates in accordance with air consumption and selects optimum number of air ends required to achieve highest energy saving operation available.

Energy-saving Control System: When air consumption greatly fluctuates, selection of compressor control system makes a big difference on the energy consumption of your compressor
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Negotiation
Warranty: Negotiation
Oil or Not: Oil Free
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|

Order Sample

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

Vacuum Pump

Types of vacuum pumps

A vacuum pump is a device that draws gas molecules from a sealed volume and maintains a partial vacuum. Its job is to create a vacuum in a volume, usually one of several. There are several types of vacuum pumps, such as root pumps, diaphragm pumps, rotary piston pumps, and self-priming centrifugal pumps.

The diaphragm pump is a dry positive displacement vacuum pump

Diaphragm pumps are a versatile type of vacuum pump. They can be installed in a variety of scenarios including container emptying, positive suction, and simultaneous fluid mixing. Their performance depends on the stiffness and durability of the diaphragm, which in turn depends on the material.
They have good performance when running in dry mode. Diaphragm pumps work very similarly to the human heart, which is why they are often used to create artificial hearts. In addition, the diaphragm pump is self-priming and has high efficiency. They are also capable of handling the most viscous liquids and are used in almost all industries.
However, this type of pump has several disadvantages. One of them is that they are difficult to restart after a power outage. Another disadvantage is that they can generate a lot of heat. Fortunately, this heat is carried away by airflow. However, this heat builds up in the multistage pump. If this happens, the diaphragm or motor may be damaged. Diaphragm pumps operating in two or more stages should be fitted with solenoid valves to maintain vacuum stability.
Diaphragm pumps are a good choice for drying processes where hygiene is important. These pumps have check valves and rubber or Teflon diaphragms. Diaphragm pumps are also ideal for high viscosity applications where shear sensitivity is important.

Roots pumps are dry method centrifugal pumps

Roots pumps use a vane rotor pump with two counter-rotating vanes that move in opposite directions to move the gas. They are often the first choice for high-throughput process applications. Depending on the size and number of blades, they can withstand up to 10 Torr.
Centrifugal pumps have several advantages, including the ability to handle corrosive fluids and high temperatures. However, when choosing a pump, it is essential to choose a reputable manufacturer. These companies will be able to advise you on the best pump design for your needs and provide excellent after-sales support. Roots pumps can be used in a wide range of industrial applications including chemical, food, and biotechnology.
The Roots pump is a dry centrifugal pump whose geometry enables it to achieve high compression ratios. The screw rotors are synchronized by a set of timing gears that allow gas to pass in both directions and create a compressed state in the chamber. The pre-compressed gas is discharged through a pressure connection and cooled with water. Some pumps are also able to accept additional cooling gas, but this should be done with caution.
The size of the impeller plays an important role in determining the pump head. The impeller diameter determines how high the pump can lift the liquid. Impeller speed also affects the head. Since the head is proportional to the specific gravity of the liquid, the available suction pressure will be proportional to the density of the liquid. The density of water is about 1.2 kg/m3, and the suction pressure of the centrifugal pump is not enough to lift the water.

The rotary vane pump is a self-priming centrifugal pump

A rotary vane pump is a centrifugal pump with a circular pump head and a cycloid cam that supports the rotor. The rotor is close to the cam wall, and two side plates seal the rotor. Vanes in vane pumps are installed in these cavities, and the rotor rotates at high speed, pushing fluid in and out of the pump. The pump offers several advantages, including a reversible design and the ability to handle a wide variety of clean fluids.
Agknx Pumps manufactures a wide range of vane pumps that combine high performance, low cost, and easy maintenance. These pumps handle medium to high viscosity liquids up to 500 degrees Fahrenheit and 200,000 SSU.
The suction side of the rotary vane pump has a discharge port, and the valve prevents the backflow of the discharge air. When the maximum pressure is reached, the outlet valve closes to prevent the backflow of exhaust gas. The mechanical separation step separates the oil from the gas in the pump circuit and returns the remaining oil particles to the sump. The float valve then reintroduces these oil particles into the oil circuit of the pump. The gas produced is almost oil-free and can be blown out of a pipe or hose.
Rotary vane pumps are self-priming positive displacement pumps commonly used in hydraulic, aeration, and vacuum systems. Unlike gear pumps, rotary vane pumps can maintain high-pressure levels while using relatively low suction pressures. The pump is also very effective when pumping viscous or high-viscosity liquids.
Vacuum Pump

Rotary piston pumps are dry method positive displacement pumps

Rotary piston pumps are dry positive displacement pumps designed to deliver high-viscosity fluids. They are capable of pumping a variety of liquids and can run dry without damaging the liquid. Rotary piston pumps are available in a variety of designs. Some are single shafts, some are two shafts and four bearings.
Positive displacement pumps operate slower than centrifugal pumps. This feature makes the positive displacement pump more sensitive to wear. Piston and plunger reciprocating pumps are particularly prone to wear. For more demanding applications, progressive cavity, diaphragm or lobe pumps may be a better choice.
Positive displacement pumps are typically used to pump high-viscosity fluids. This is because the pump relies on a mechanical seal between the rotating elements and the pump casing. As a result, when fluids have low viscosity, their performance is limited. Additionally, low viscosity fluids can cause valve slippage.
These pumps have a piston/plunger arrangement using stainless steel rotors. Piston/piston pumps have two cavities on the suction side. The fluid then flows from one chamber to the other through a helical motion. This results in very low shear and pulsation rates. The pump is usually installed in a cylindrical housing.

Rotary vane pump corrosion resistance

Rotary vane vacuum pumps are designed for use in a variety of industries. They feature plasma-treated corrosion-resistant parts and anti-suck-back valves to help reduce the number of corrosive vapors entering the pump. These pumps are commonly used in freeze dryers, vacuum ovens, and degassing processes. The high flow rates they provide in their working vacuum allow them to speed up processes and reduce the time it takes to run them. Plus, they have energy-efficient motors and silent volume. <br/While rotary vane vacuum pumps are relatively corrosion resistant, they should not be used for aggressive chemicals. For these chemicals, the most suitable pump is the chemical mixing pump, which combines two types of pumps to improve corrosion resistance. If the application requires a more powerful pump, a progressive cavity pump (eg VACUU*PURE 10C) is suitable.
Oil seals used in rotary vane pumps are important to pump performance. The oil seal prevents corrosion of the aluminum parts of the rotary vane pump and prolongs the service life. Most rotary vane vacuum pumps have a standard set of components, although each component may have different oil seals.
Rotary vane vacuum pumps are the most common type of positive displacement pump. They provide quiet operation and long service life. They are also reliable and inexpensive and can be used in a variety of applications.
Vacuum Pump

Roots pumps are primarily used as a vacuum booster

Root vacuum pumps are mainly used as vacuum boosters in industrial applications. They need a thorough understanding of operating principles and proper maintenance to function properly. This course is an introduction to Roots vacuum pumps, covering topics such as pump principles, multi-stage pumps, temperature effects, gas cooling, and maintenance.
Roots pumps have many advantages, including compact and quiet operation. They do not generate particles and have a long service life. They also don’t require oil and have a small footprint. However, Roots pumps have several disadvantages, including relatively high maintenance costs and low pumping speeds near atmospheric pressure.
Root vacuum pumps are often used with rotary vane vacuum pumps. They work on the same principle, the air enters a conveying unit formed by two rolling pistons in the housing. The piston heads are separated from each other, and the air passes through the unit without being reduced until it is discharged. When the air in the next unit reaches a higher absolute pressure, it is expelled from the last unit.
Roots pumps can be classified as sheathed or sealed. Roots pumps with sealed motors are suitable for pumping toxic gases. They have less clearance between the stator and motor rotor and have a sealed tank.

China wholesaler Hot Sale Oil Free Scroll Vacuum Pump Factory vacuum pump belt China wholesaler Hot Sale Oil Free Scroll Vacuum Pump Factory vacuum pump belt
editor by Dream 2024-05-16

China supplier Medical and Lab Use 3cfm Silent Portable Oil Free Vacuum Pump with high quality

Product Description

Product Parameter

NOTE: All test values are nominal and for reference only. They are not guaranteed maximum or minimum limits, nor do they imply mean or median.
Model Number ZGK-80
Performance Data  
Head configuration Pressure parallel flow
Nominal voltage/frequency 220V/50HZ
Max. Current 0.9A
Max. Power 190W
Max. Flow 80L/MIN
Max. Vacuum -90Kpa
Speed at rated load 1400RPM
Noise <52dB
Max.Pressure restart 0 PSI
Electrical Data  
Motor type[Capacitance] P.S.C(8uF)
Motor insulation class B
Thermal switch[Open temperature] Thermally protected(145°C)
Line lead wire color,gauge Brown(hot),blue(neutral),18AWG
Capacitor lead wire color,gauge Black,black,18 AWG
General Data  
Operating ambient air temperature 50° to 104°F(10° to 40°C)
Safety certification ETL
Dimension(LXWXH) 192X99X151 MM
Installation size 129X70 MM
Net weight 6.5KG
Application Medical suctions, lab,vacuum packaing etc.

Product Application

Our manufacturing process
Our Service


/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on Line Support and Free Spare Parts
Air Flow: 80 L/Min
Vacuum: -90kpa
Noise: ≤52dB(a)
Brand Name: OEM
Voltage: 220V 50Hz
Samples:
US$ 85/Piece
1 Piece(Min.Order)

|
Customization:
Available

|

vacuum pump

Can Vacuum Pumps Be Used for Vacuum Furnaces?

Yes, vacuum pumps can be used for vacuum furnaces. Here’s a detailed explanation:

Vacuum furnaces are specialized heating systems used in various industries for heat treatment processes that require controlled environments with low or no atmospheric pressure. Vacuum pumps play a crucial role in creating and maintaining the vacuum conditions necessary for the operation of vacuum furnaces.

Here are some key points regarding the use of vacuum pumps in vacuum furnaces:

1. Vacuum Creation: Vacuum pumps are used to evacuate the furnace chamber, creating a low-pressure or near-vacuum environment. This is essential for the heat treatment processes carried out in the furnace, as it helps eliminate oxygen and other reactive gases, preventing oxidation or unwanted chemical reactions with the heated materials.

2. Pressure Control: Vacuum pumps provide the means to control and maintain the desired pressure levels within the furnace chamber during the heat treatment process. Precise pressure control is necessary to achieve the desired metallurgical and material property changes during processes such as annealing, brazing, sintering, and hardening.

3. Contamination Prevention: By removing gases and impurities from the furnace chamber, vacuum pumps help prevent contamination of the heated materials. This is particularly important in applications where cleanliness and purity of the processed materials are critical, such as in the aerospace, automotive, and medical industries.

4. Rapid Cooling: Some vacuum furnace systems incorporate rapid cooling capabilities, known as quenching. Vacuum pumps assist in facilitating the rapid cooling process by removing the heat generated during quenching, ensuring efficient cooling and minimizing distortion or other unwanted effects on the treated materials.

5. Process Flexibility: Vacuum pumps provide flexibility in the type of heat treatment processes that can be performed in vacuum furnaces. Different heat treatment techniques, such as vacuum annealing, vacuum brazing, or vacuum carburizing, require specific pressure levels and atmospheric conditions that can be achieved and maintained with the use of vacuum pumps.

6. Vacuum Pump Types: Different types of vacuum pumps can be used in vacuum furnaces, depending on the specific requirements of the heat treatment process. Commonly used vacuum pump technologies include oil-sealed rotary vane pumps, dry screw pumps, diffusion pumps, and cryogenic pumps. The choice of vacuum pump depends on factors such as required vacuum level, pumping speed, reliability, and compatibility with the process gases.

7. Maintenance and Monitoring: Proper maintenance and monitoring of vacuum pumps are essential to ensure their optimal performance and reliability. Regular inspections, lubrication, and replacement of consumables (such as oil or filters) are necessary to maintain the efficiency and longevity of the vacuum pump system.

8. Safety Considerations: Operating vacuum furnaces with vacuum pumps requires adherence to safety protocols. This includes proper handling of potentially hazardous gases or chemicals used in the heat treatment processes, as well as following safety guidelines for operating and maintaining the vacuum pump system.

Overall, vacuum pumps are integral components of vacuum furnaces, enabling the creation and maintenance of the required vacuum conditions for precise and controlled heat treatment processes. They contribute to the quality, consistency, and efficiency of the heat treatment operations performed in vacuum furnaces across a wide range of industries.

vacuum pump

Can Vacuum Pumps Be Used for Soil and Groundwater Remediation?

Vacuum pumps are indeed widely used for soil and groundwater remediation. Here’s a detailed explanation:

Soil and groundwater remediation refers to the process of removing contaminants from the soil and groundwater to restore environmental quality and protect human health. Vacuum pumps play a crucial role in various remediation techniques by facilitating the extraction and treatment of contaminated media. Some of the common applications of vacuum pumps in soil and groundwater remediation include:

1. Soil Vapor Extraction (SVE): Soil vapor extraction is a widely used remediation technique for volatile contaminants present in the subsurface. It involves the extraction of vapors from the soil by applying a vacuum to the subsurface through wells or trenches. Vacuum pumps create a pressure gradient that induces the movement of vapors towards the extraction points. The extracted vapors are then treated to remove or destroy the contaminants. Vacuum pumps play a vital role in SVE by maintaining the necessary negative pressure to enhance the volatilization and extraction of contaminants from the soil.

2. Dual-Phase Extraction (DPE): Dual-phase extraction is a remediation method used for the simultaneous extraction of both liquids (such as groundwater) and vapors (such as volatile organic compounds) from the subsurface. Vacuum pumps are utilized to create a vacuum in extraction wells or points, drawing out both the liquid and vapor phases. The extracted groundwater and vapors are then separated and treated accordingly. Vacuum pumps are essential in DPE systems for efficient and controlled extraction of both liquid and vapor-phase contaminants.

3. Groundwater Pumping and Treatment: Vacuum pumps are also employed in groundwater remediation through the process of pumping and treatment. They are used to extract contaminated groundwater from wells or recovery trenches. By creating a vacuum or negative pressure, vacuum pumps facilitate the flow of groundwater towards the extraction points. The extracted groundwater is then treated to remove or neutralize the contaminants before being discharged or re-injected into the ground. Vacuum pumps play a critical role in maintaining the required flow rates and hydraulic gradients for effective groundwater extraction and treatment.

4. Air Sparging: Air sparging is a remediation technique used to treat groundwater and soil contaminated with volatile organic compounds (VOCs). It involves the injection of air or oxygen into the subsurface to enhance the volatilization of contaminants. Vacuum pumps are utilized in air sparging systems to create a vacuum or negative pressure zone in wells or points surrounding the contaminated area. This induces the movement of air and oxygen through the soil, facilitating the release and volatilization of VOCs. Vacuum pumps are essential in air sparging by maintaining the necessary negative pressure gradient for effective contaminant removal.

5. Vacuum-Enhanced Recovery: Vacuum-enhanced recovery, also known as vacuum-enhanced extraction, is a remediation technique used to recover non-aqueous phase liquids (NAPLs) or dense non-aqueous phase liquids (DNAPLs) from the subsurface. Vacuum pumps are employed to create a vacuum or negative pressure gradient in recovery wells or trenches. This encourages the movement and extraction of NAPLs or DNAPLs towards the recovery points. Vacuum pumps facilitate the efficient recovery of these dense contaminants, which may not be easily recoverable using traditional pumping methods.

It’s important to note that different types of vacuum pumps, such as rotary vane pumps, liquid ring pumps, or air-cooled pumps, may be used in soil and groundwater remediation depending on the specific requirements of the remediation technique and the nature of the contaminants.

In summary, vacuum pumps play a vital role in various soil and groundwater remediation techniques, including soil vapor extraction, dual-phase extraction, groundwater pumping and treatment, air sparging, and vacuum-enhanced recovery. By creating and maintaining the necessary pressure differentials, vacuum pumps enable the efficient extraction, treatment, and removal of contaminants, contributing to the restoration of soil and groundwater quality.

vacuum pump

What Is the Purpose of a Vacuum Pump in an HVAC System?

In an HVAC (Heating, Ventilation, and Air Conditioning) system, a vacuum pump serves a crucial purpose. Here’s a detailed explanation:

The purpose of a vacuum pump in an HVAC system is to remove air and moisture from the refrigerant lines and the system itself. HVAC systems, particularly those that rely on refrigeration, operate under specific pressure and temperature conditions to facilitate the transfer of heat. To ensure optimal performance and efficiency, it is essential to evacuate any non-condensable gases, air, and moisture from the system.

Here are the key reasons why a vacuum pump is used in an HVAC system:

1. Removing Moisture: Moisture can be present within an HVAC system due to various factors, such as system installation, leaks, or improper maintenance. When moisture combines with the refrigerant, it can cause issues like ice formation, reduced system efficiency, and potential damage to system components. A vacuum pump helps remove moisture by creating a low-pressure environment, which causes the moisture to boil and turn into vapor, effectively evacuating it from the system.

2. Eliminating Air and Non-Condensable Gases: Air and non-condensable gases, such as nitrogen or oxygen, can enter an HVAC system during installation, repair, or through leaks. These gases can hinder the refrigeration process, affect heat transfer, and decrease system performance. By using a vacuum pump, technicians can evacuate the air and non-condensable gases, ensuring that the system operates with the designed refrigerant and pressure levels.

3. Preparing for Refrigerant Charging: Prior to charging the HVAC system with refrigerant, it is crucial to create a vacuum to remove any contaminants and ensure the system is clean and ready for optimal refrigerant circulation. By evacuating the system with a vacuum pump, technicians ensure that the refrigerant enters a clean and controlled environment, reducing the risk of system malfunctions and improving overall efficiency.

4. Leak Detection: Vacuum pumps are also used in HVAC systems for leak detection purposes. After evacuating the system, technicians can monitor the pressure to check if it holds steady. A significant drop in pressure indicates the presence of leaks, enabling technicians to identify and repair them before charging the system with refrigerant.

In summary, a vacuum pump plays a vital role in an HVAC system by removing moisture, eliminating air and non-condensable gases, preparing the system for refrigerant charging, and aiding in leak detection. These functions help ensure optimal system performance, energy efficiency, and longevity, while also reducing the risk of system malfunctions and damage.

China supplier Medical and Lab Use 3cfm Silent Portable Oil Free Vacuum Pump with high quality China supplier Medical and Lab Use 3cfm Silent Portable Oil Free Vacuum Pump with high quality
editor by Dream 2024-05-15

China wholesaler Dry Oil-Free Screw Vacuum Pump, High Vacuum Customizable, Explosion-Proof and Corrosion-Resistant, Small Air-Cooled Oil-Free Pump vacuum pump design

Product Description

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.Dry Oil-Free Air Cooling Screw Vacuum Pump ,This is an advanced and widely used vacuum pump at present, It is 1 of the best-selling products of our company.
 It adopts explosion-proof motor with high configuration, It has the characteristics of low noise, no oil and pollution, clean and high vacuum, simple and convenient use, operation and maintenance, Widely used in many industries, For example, oil and gas recovery, vacuum coating, biomedicine, food processing, single crystal furnace, vacuum forming, vacuum melting, electronic photovoltaic, semiconductor synthesis and many other industries are used.
The dry oil-free screw vacuum pump produced by our company is divided into air cooling and water cooling according to the extraction rate, and there are many models for you to choose.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

Type
(Air cooled series)		                                                                             Basic parameters 
Pumping speed
(m3/h)		 Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)		 outlet caliber (mm) Pump head weight
(kg)		 noise dB(A) Overall dimension
(length*width*height)
(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 30 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 90 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

Characteristic Curve

 

Detailed Photos

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

New plant plHangZhou

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

High precision machining equipment

The company cooperates with many scientific research institutions and universities, such as ZheJiang University, China University of petroleum, ZheJiang Institute of mechanical design, etc.with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents.Our technology is leading, the product quality is stable, the product has a good reputation in China’s domestic market, is sold all over the country, and is exported to Europe, America, Africa, the Middle East and Southeast Asia,We adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.

Product quality wins consumer cooperation

In shipment

ISO 9001

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Lifetime Paid Service
Warranty: One Year
Oil or Not: Oil Free
Structure: Screw Vacuum Pump
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Customization:
Available

|

small vacuum pump

What are the cost considerations when purchasing or installing small vacuum pumps?

When purchasing and installing small vacuum pumps, there are several cost considerations to keep in mind. These costs can vary based on factors such as the type of pump, application, and installation requirements. Here are key cost considerations:

1. Initial Purchase Cost:

The initial purchase cost of the vacuum pump is a significant factor. Different types of small vacuum pumps come with varying price tags. For example, diaphragm and rotary vane pumps are generally more affordable than high-end scroll pumps or specialized pumps for specific applications.

2. Pump Type:

The type of vacuum pump you choose will impact the cost. Oil-free pumps may be more expensive upfront but can reduce long-term maintenance and oil-related costs.

3. Application Requirements:

The specific requirements of your application can affect costs. For instance, if your application demands a high vacuum level or precise control, you may need a more advanced and costly pump.

4. Maintenance Costs:

Consider the long-term maintenance costs of the pump. Oil-lubricated pumps require regular oil changes and maintenance, which can add to the overall cost of ownership. Oil-free pumps generally have lower maintenance costs.

5. Installation Expenses:

Installation costs may include labor, materials, and any necessary modifications to your equipment or facility. Some pumps may require specialized installation, especially in industrial or laboratory settings.

6. Operating Costs:

Factor in the ongoing operating costs, such as electricity consumption. Energy-efficient pumps may have lower operational expenses over time.

7. Warranty and Service:

Check the manufacturer’s warranty and the availability of service and spare parts. A longer warranty can provide cost savings by reducing repair expenses.

8. Life Cycle Costs:

Consider the total cost of ownership over the pump’s expected lifespan. A higher upfront cost may be justified if it results in lower overall operating and maintenance costs.

9. Energy Efficiency:

Energy-efficient pumps may have a higher initial cost but can lead to significant savings in energy bills over time.

10. Regulatory Compliance:

Some industries or applications may require compliance with specific regulations or safety standards, which could add costs related to compliance testing and certification.

11. Customization:

If your application requires customized features or configurations, be prepared for potential customization costs.

12. Spare Parts and Accessories:

Consider the availability and cost of spare parts and accessories, as well as any additional components you may need for your specific application.

It’s essential to perform a thorough cost analysis that takes into account both the initial purchase cost and the long-term operating and maintenance expenses. This analysis will help you make an informed decision when selecting a small vacuum pump that aligns with your budget and application requirements.

Additionally, consult with manufacturers or suppliers to obtain detailed cost estimates and explore any available financing options or discounts that may apply to your purchase.

small vacuum pump

How do small vacuum pumps handle different types of materials or substances?

Small vacuum pumps are versatile tools that can handle a wide range of materials and substances, both gaseous and liquid. Their ability to create and control vacuum levels makes them suitable for various applications. Here’s how small vacuum pumps handle different types of materials:

1. Gases and Vapors:

Small vacuum pumps excel at removing gases and vapors from a closed system or chamber. They work by creating a pressure differential, with lower pressure inside the chamber than outside. This pressure difference causes gases to flow into the pump, where they are compressed or expelled.

2. Liquids:

Some small vacuum pumps, like diaphragm pumps, can handle liquid transfer and filtration tasks. They create a vacuum to draw liquids through filters or into collection vessels. This capability is useful in applications such as vacuum filtration in laboratories.

3. Solids:

While vacuum pumps primarily handle gases and liquids, they indirectly affect solids in some applications. For example, in vacuum drying processes, a vacuum pump removes moisture or solvents from solid materials by reducing the surrounding pressure, facilitating evaporation.

4. Contaminants and Particles:

Small vacuum pumps can also handle contaminants and particles to some extent. Filters and traps can be integrated into the vacuum system to capture and remove particulate matter or contaminants from the gas or liquid being processed.

5. Biological Samples:

In laboratory settings, small vacuum pumps are used for various biological sample handling tasks. They can be employed for vacuum aspiration in cell culture work, concentration of DNA or proteins, and filtration of biological fluids.

6. Airborne Pathogens:

In medical environments, vacuum pumps are used in devices like suction units to safely and efficiently handle airborne pathogens, secretions, and fluids. The vacuum created by the pump aids in the removal of these materials from patients.

7. Chemicals and Hazardous Substances:

When handling hazardous chemicals or substances, it’s crucial to select a vacuum pump that is compatible with the materials involved. Diaphragm pumps, for example, offer oil-free and chemically resistant operation, making them suitable for handling corrosive or reactive chemicals.

8. Refrigerants:

In HVAC and refrigeration systems, small vacuum pumps are used to evacuate and degas refrigerant lines before charging the system. This helps ensure the efficient and reliable operation of refrigeration equipment.

9. Sample Manipulation:

In scientific research and analytical applications, small vacuum pumps are used for precise sample manipulation. They can be employed to move and control the position of samples within a vacuum chamber or other controlled environments.

Small vacuum pumps are chosen based on the specific requirements of the materials or substances being handled. Compatibility with the material, the required vacuum level, and the desired flow rate are some of the factors that influence the selection of the appropriate pump for a given application.

small vacuum pump

What are the advantages of using a small vacuum pump in specific applications?

Small vacuum pumps offer various advantages in specific applications across multiple industries. These advantages make them valuable tools for achieving specific tasks efficiently. Here are some key advantages:

1. Portability:

Small vacuum pumps are compact and lightweight, making them easy to transport and use in various locations. Their portability is especially beneficial for fieldwork, mobile applications, and situations where mobility is essential.

2. Precision and Control:

Small vacuum pumps provide precise control over the vacuum level, allowing for accurate and controlled processes. This level of control is crucial in scientific research, medical procedures, and manufacturing applications requiring fine-tuned vacuum conditions.

3. Oil-Free Operation:

Many small vacuum pumps, such as diaphragm pumps, operate without the need for oil lubrication. This oil-free operation is essential in applications where oil contamination is undesirable, such as in laboratories and cleanroom environments.

4. Low Maintenance:

Compared to larger industrial vacuum systems, small vacuum pumps often have simpler maintenance requirements. They are designed for ease of use and may require less frequent servicing, reducing downtime and maintenance costs.

5. Energy Efficiency:

Small vacuum pumps are energy-efficient, especially when equipped with features like variable speed drives (VSDs). VSDs allow the pump to adjust its speed based on demand, minimizing energy consumption and reducing operational costs.

6. Quiet Operation:

Some small vacuum pumps, such as scroll pumps and diaphragm pumps, operate quietly. This characteristic is advantageous in environments where noise levels need to be minimized, such as in laboratories, medical facilities, and offices.

7. Versatility:

Small vacuum pumps can be used in a wide range of applications, including vacuum filtration, rotary evaporation, sample concentration, and air sampling. Their versatility makes them suitable for diverse industries, from pharmaceuticals to electronics manufacturing.

8. Cost-Effectiveness:

Small vacuum pumps are often more cost-effective than larger industrial vacuum systems. They offer a balance between performance and affordability, making them accessible to a broad range of users and applications.

It’s important to note that the advantages of using small vacuum pumps are application-specific. To maximize the benefits, it’s essential to select the right type of pump that matches the requirements and constraints of the specific application.

China wholesaler Dry Oil-Free Screw Vacuum Pump, High Vacuum Customizable, Explosion-Proof and Corrosion-Resistant, Small Air-Cooled Oil-Free Pump vacuum pump design China wholesaler Dry Oil-Free Screw Vacuum Pump, High Vacuum Customizable, Explosion-Proof and Corrosion-Resistant, Small Air-Cooled Oil-Free Pump vacuum pump design
editor by Dream 2024-05-15

China supplier Daily maintenance free reasonable price GWSP75 portable vortex small dry oilless oil-free electric air lab scroll vacuum pump vacuum pump diy

Product Description

 

Product Description

GWSP Oil free Scroll Vacuum Pump

Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.

Basic informations:
1) Model: GWSP75 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 8.0Pa/0.08 mbar (abs.)
3) Max suction capacity: 50Hz-1.0L/s 60Hz-1.2L/s

Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
 

Technical Specifications

 

  Model GWSP40 GWSP75 GWSP150 GWSP300 GWSP600 GWSP1000
  Pumping Speed 50Hz l/s 0.5 1.0  2.0  4.3 8.7 16.6
m3/h 1.8 3.6 7.2 15.5 31.3 59.8
cfm 1.1 2.1 4.3 9.3 18.7 35.8
60Hz l/s 0.6 1.2 2.4 5.1 10.4 20.0 
m3/h 2.2 4.3 8.6 18.3 37.4 71.6
cfm 1.3 2.5 5.1 10.9 22.3 42.8
  Ultimate Pressure Torr   ≤1.1*10-1   ≤6.0*10-2   ≤4.5*10-2   ≤1.9*10-2   ≤7.5*10-3   ≤7.5*10-3
psi   ≤2.2*10-3   ≤1.2*10-3   ≤9.0*10-4   ≤3.8*10-4   ≤1.5*10-4   ≤1.5*10-4
Pa   ≤15   ≤8   ≤6   ≤2.6   ≤1   ≤1
mbar   ≤1.5*10-1   ≤8.0*10-2   ≤6.0*10-2   ≤2.6*10-2   ≤1.0*10-2   ≤1.0*10-2
  Noise Level dB(A)   ≤54   ≤57   ≤57   ≤60   ≤61   ≤65
  Leakage mbar·l/s 1*10-7
  Max. Inlet/Exhaust Pressure MPa 0.1 / 0.13
  Ambient Operation Temp. ºF 41~104
  Motor 1 phase Power kW 0.25 0.55 0.55 0.55 0.75 —
Voltage V   110~115 (60Hz),200~230 (50Hz) —
Speed rpm 1425(50Hz),1725(60Hz) —
Plug   North America, Europe, UK/Ireland, India —
  Motor 3 phase Power kW — 0.55 0.55 0.55 0.75 1.5
Voltage V — 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz)
Speed rpm —      1425 (50Hz),1725 (60Hz)
  Inlet/Exhaust Flange   KF25/KF16 KF40/KF16 KF40/KF16*2
  Dimensions 1 phase mm 326*212*253 450*260*296 455*260*296 493*297*334 538*315*348 —
3 phase mm — 450*260*296 455*260*296 493*297*334 538*315*348 576*450*402
  Net Weight 1 phase kg 15 21 22 29 36 —
3 phase kg — 20 21 28 31 54
  Cooling Type   Air cooled
  Others   With air flush

Features & Benefits

No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance

 

 

 

Quality Control

CMM inspection system assures
fixed tolarance on dimension&shape

Pump Testing

Applications

Analyzing instrument and device.
Spectroscopy/scHangZhou electron microscopy.
Space environment simulation machine.
Helium Leak detector.
Mass spectrometer.
Cryopump regeneration.
Accelerators/synchrotrons.

Food and drug industry.
Freezing dryer.
Vacuum storage.
Medical equipment
Low temperature plasma sterilizer.
Vacuum storage.
Dental equipment.

Vacuum equipment.
Oil free ultrahigh vacuum unit
Oil free vacuum unit

 

Related Products

 

GWT25 Foreline Filter
Performance: Filter out the dust particles contained in the intake gas.
Application: Vacuum coating, food and drug processing, ceramic and glass manufacturing, vacuum CHINAMFG and vacuum packaging systems.

GWS16 Exhaust Silencer
Performance: Reduce exhaust noise from oil-free vacuum systems.
Application: Installation of oil free scroll vacuum pumps requires a quiet vacuum system.

GWMMK75 Major Maintenance Kit
Performance: Prolong the service life of the product.
Application: For the major maintenance of oil free scroll vacuum pump GWSP75.

GWTSK75 Tip Seal Kit
Performance: Prolong the service life of the product.
Application: For the scheduled maintenance of oil free scroll vacuum pump GWSP75.

 

Company Profile

GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.

FAQ

Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Year
Oil or Not: Oil Free
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

small vacuum pump

Where can individuals or businesses source small vacuum pumps for various applications?

Individuals and businesses looking to source small vacuum pumps for a wide range of applications have several options to consider. Here are common sources for acquiring small vacuum pumps:

1. Manufacturers and Authorized Dealers:

Contacting the manufacturers directly or their authorized dealers is often a reliable way to purchase small vacuum pumps. Manufacturers typically offer a wide selection of models and provide technical support. Authorized dealers can assist with product selection and may offer competitive pricing.

2. Industrial Suppliers:

Industrial supply companies and distributors often carry a variety of vacuum pumps. These suppliers cater to a range of industries, including manufacturing, research, and laboratories. They can provide competitive pricing and may offer bulk purchase discounts.

3. Laboratory Equipment Suppliers:

For those seeking vacuum pumps for laboratory or scientific applications, specialized laboratory equipment suppliers are a valuable resource. They offer pumps designed for precise and controlled vacuum needs.

4. Online Marketplaces:

Online marketplaces like Amazon, eBay, and Alibaba feature a wide array of small vacuum pumps from various manufacturers and sellers. Buyers can compare prices, read reviews, and often find both new and used pumps.

5. HVAC and Refrigeration Suppliers:

Heating, ventilation, air conditioning, and refrigeration (HVAC/R) suppliers may carry vacuum pumps suitable for HVAC system maintenance and refrigeration applications. These suppliers are often found locally.

6. Scientific and Research Institutions:

Scientific and research institutions occasionally sell surplus equipment, including vacuum pumps, through online auctions or specialized surplus equipment vendors.

7. Rental Services:

For short-term or occasional use, renting small vacuum pumps can be a cost-effective option. Equipment rental companies may offer various pump types for temporary applications.

8. Online Manufacturer Websites:

Visiting the official websites of vacuum pump manufacturers provides access to comprehensive product information, specifications, and contact details for sales and support.

9. Trade Shows and Exhibitions:

Attending industry-specific trade shows, exhibitions, and conferences can be an excellent opportunity to connect with manufacturers, distributors, and suppliers in person. It allows for hands-on product evaluation and networking.

10. Classified Ads and Auctions:

Classified advertisement websites and auction platforms may feature used vacuum pumps for sale. Buyers should exercise caution and thoroughly assess the condition of used equipment.

When sourcing small vacuum pumps, individuals and businesses should consider factors such as the pump’s specifications, warranty, customer support, and the reputation of the supplier or seller. It’s essential to choose a source that aligns with the specific requirements of the application and ensures the reliability and performance of the vacuum pump.

small vacuum pump

What are the noise levels associated with small vacuum pump operation?

Noise levels in small vacuum pump operation can vary depending on several factors, including the type of pump, its size, and the specific application. Here’s a general overview of noise levels associated with different types of small vacuum pumps:

1. Diaphragm Pumps:

Diaphragm pumps are known for their relatively low noise levels. They typically operate quietly, making them suitable for applications where noise is a concern, such as laboratory equipment and medical devices.

2. Scroll Pumps:

Scroll pumps are another type of vacuum pump that operates quietly. Their design minimizes noise, and they are often used in noise-sensitive environments like research laboratories.

3. Rotary Vane Pumps:

Rotary vane pumps, while efficient, can produce moderate noise levels during operation. The noise generated depends on the pump’s size and speed. In industrial settings, soundproofing measures may be necessary.

4. Piston Pumps:

Piston pumps can produce noticeable noise, particularly in larger models. Their reciprocating motion can result in higher noise levels compared to other pump types. Proper sound insulation or remote installation may be required in some cases.

5. Pneumatic Pumps:

Pneumatic vacuum pumps, driven by compressed air, tend to be relatively quiet during operation. Noise levels can vary based on the design and size of the pneumatic system used.

6. Oil-Free Pumps:

Vacuum pumps that operate without oil tend to be quieter. Oil-free pumps eliminate the noise associated with oil lubrication systems. They are often used in noise-sensitive applications.

7. Application-Specific Variations:

Noise levels can also be influenced by the specific application and how the vacuum pump is integrated into the system. Proper installation, soundproofing enclosures, and vibration isolation can help reduce noise levels further.

8. Regulatory Compliance:

In some industries, such as healthcare, there may be regulatory requirements for noise levels in equipment. Vacuum pumps used in medical devices must comply with noise regulations to ensure patient comfort and safety.

To assess the noise level of a specific small vacuum pump, you should refer to the manufacturer’s specifications, which typically provide information on sound emissions in decibels (dB) at various operating conditions. This information can help you choose the most suitable pump for your application and implement noise mitigation measures as needed.

In summary, noise levels associated with small vacuum pump operation can vary, but many types of small vacuum pumps, such as diaphragm and scroll pumps, are known for their relatively low noise levels. It’s important to consider the specific pump type, size, and application requirements when evaluating noise concerns and implementing noise reduction strategies.

small vacuum pump

What industries commonly rely on small vacuum pumps for their operations?

Small vacuum pumps play a crucial role in various industries, offering versatile solutions for a wide range of applications. Here are industries that commonly rely on small vacuum pumps for their operations:

1. Laboratory and Scientific Research:

Small vacuum pumps are essential in laboratories for applications such as vacuum filtration, rotary evaporation, freeze drying, and sample concentration. Scientific research in fields like chemistry, biology, and physics often relies on precise vacuum control.

2. Healthcare and Medical:

In the medical and healthcare industry, small vacuum pumps are used in devices like medical aspirators, wound care systems, and diagnostic equipment. They help create the necessary vacuum for procedures such as suctioning, wound drainage, and blood collection.

3. Manufacturing and Industrial Processes:

Manufacturing industries utilize small vacuum pumps in various processes, including vacuum packaging, degassing of liquids and resins, and handling of materials. Industries such as food processing, electronics, and plastics rely on vacuum technology for efficient production.

4. HVAC and Refrigeration:

In heating, ventilation, air conditioning (HVAC), and refrigeration systems, small vacuum pumps are used for evacuating and degassing refrigerant lines. This ensures optimal system performance and prevents issues like moisture contamination.

5. Automotive and Aerospace:

The automotive and aerospace industries use small vacuum pumps in applications like power brake boosters, emission control systems, and aircraft de-icing systems. These pumps play a crucial role in ensuring safety and performance in transportation equipment.

6. Environmental Monitoring and Analysis:

Environmental monitoring equipment, including air and water quality analyzers, often relies on small vacuum pumps for sample collection and analysis. They help ensure accurate data in environmental studies and compliance monitoring.

7. Semiconductor and Electronics:

In semiconductor manufacturing and electronics assembly, small vacuum pumps are used in vacuum pick-and-place systems, surface mount technology (SMT) equipment, and wafer handling. They contribute to precision and reliability in microelectronics production.

8. Research and Development:

Research and development efforts in various industries, including materials science, nanotechnology, and aerospace, rely on small vacuum pumps for experiments and prototyping. Vacuum chambers are commonly used in R&D to simulate specific environmental conditions.

9. Pharmaceuticals and Biotechnology:

The pharmaceutical and biotechnology industries use small vacuum pumps for processes such as filtration, lyophilization (freeze drying), and drug formulation. These pumps are critical for drug manufacturing and research.

10. Food and Beverage:

In the food and beverage industry, small vacuum pumps are used in vacuum packaging machines to extend the shelf life of perishable products. They help remove air from packaging, preventing spoilage and preserving freshness.

11. Energy and Power Generation:

Small vacuum pumps are used in power plants and energy facilities for applications like turbine sealing and transformer evacuation. They contribute to the efficiency and reliability of power generation systems.

These industries rely on small vacuum pumps to perform critical functions, enhance product quality, and optimize various processes. The versatility and efficiency of small vacuum pumps make them indispensable tools in modern industrial and scientific applications.

China supplier Daily maintenance free reasonable price GWSP75 portable vortex small dry oilless oil-free electric air lab scroll vacuum pump vacuum pump diyChina supplier Daily maintenance free reasonable price GWSP75 portable vortex small dry oilless oil-free electric air lab scroll vacuum pump vacuum pump diy
editor by Dream 2024-05-14

China Best Sales GEOWELL GWSP300 accelerators/synchrotrons oil free vacuum pump with Hot selling

Product Description

 

Product Description

GWSP Oil free Scroll Vacuum Pump

Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.

Basic informations:
1) Model: GWSP300 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 2.6 Pa/0.026 mbar (abs.)
3) Max suction capacity: 50Hz-4.3L/s 60Hz-5.1L/s

Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
 

Technical Specifications

 

  Model GWSP40 GWSP75 GWSP150 GWSP300 GWSP600 GWSP1000
  Pumping Speed 50Hz l/s 0.5 1.0  2.0  4.3 8.7 16.6
m3/h 1.8 3.6 7.2 15.5 31.3 59.8
cfm 1.1 2.1 4.3 9.3 18.7 35.8
60Hz l/s 0.6 1.2 2.4 5.1 10.4 20.0 
m3/h 2.2 4.3 8.6 18.3 37.4 71.6
cfm 1.3 2.5 5.1 10.9 22.3 42.8
  Ultimate Pressure Torr   ≤1.1*10-1   ≤6.0*10-2   ≤4.5*10-2   ≤1.9*10-2   ≤7.5*10-3   ≤7.5*10-3
psi   ≤2.2*10-3   ≤1.2*10-3   ≤9.0*10-4   ≤3.8*10-4   ≤1.5*10-4   ≤1.5*10-4
Pa   ≤15   ≤8   ≤6   ≤2.6   ≤1   ≤1
mbar   ≤1.5*10-1   ≤8.0*10-2   ≤6.0*10-2   ≤2.6*10-2   ≤1.0*10-2   ≤1.0*10-2
  Noise Level dB(A)   ≤54   ≤57   ≤57   ≤60   ≤61   ≤65
  Leakage mbar·l/s 1*10-7
  Max. Inlet/Exhaust Pressure MPa 0.1 / 0.13
  Ambient Operation Temp. ºF 41~104
  Motor 1 phase Power kW 0.25 0.55 0.55 0.55 0.75 —
Voltage V   110~115 (60Hz),200~230 (50Hz) —
Speed rpm 1425(50Hz),1725(60Hz) —
Plug   North America, Europe, UK/Ireland, India —
  Motor 3 phase Power kW — 0.55 0.55 0.55 0.75 1.5
Voltage V — 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz)
Speed rpm —      1425 (50Hz),1725 (60Hz)
  Inlet/Exhaust Flange   KF25/KF16 KF40/KF16 KF40/KF16*2
  Dimensions 1 phase mm 326*212*253 450*260*296 455*260*296 493*297*334 538*315*348 —
3 phase mm — 450*260*296 455*260*296 493*297*334 538*315*348 576*450*402
  Net Weight 1 phase kg 15 21 22 29 36 —
3 phase kg — 20 21 28 31 54
  Cooling Type   Air cooled
  Others   With air flush

Features & Benefits

 

No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance

 

 

 

Quality Control

CMM inspection system assures
fixed tolarance on dimension&shape

Pump Testing

Applications

Analyzing instrument and device.
Spectroscopy/scHangZhou electron microscopy.
Space environment simulation machine.
Helium Leak detector.
Mass spectrometer.
Cryopump regeneration.
Accelerators/synchrotrons.

Food and drug industry.
Freezing dryer.
Vacuum storage.
Medical equipment
Low temperature plasma sterilizer.
Vacuum storage.
Dental equipment.

Vacuum equipment.
Oil free ultrahigh vacuum unit
Oil free vacuum unit

 

Related Products

GWT25 Foreline Filter
Performance: Filter out the dust particles contained in the intake gas.
Application: Vacuum coating, food and drug processing, ceramic and glass manufacturing, vacuum CHINAMFG and vacuum packaging systems.

GWS16 Exhaust Silencer
Performance: Reduce exhaust noise from oil-free vacuum systems.
Application: Installation of oil free scroll vacuum pumps requires a quiet vacuum system.

GWMMK300 Major Maintenance Kit
Performance: Prolong the service life of the product.
Application: For the major maintenance of oil free scroll vacuum pump GWSP300.

GWTSK300 Tip Seal Kit
Performance: Prolong the service life of the product.
Application: For the scheduled maintenance of oil free scroll vacuum pump GWSP300.

 

Company Profile

GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.

FAQ

Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Years
Oil or Not: Oil Free
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

vacuum pump

Can Vacuum Pumps Be Used for Vacuum Furnaces?

Yes, vacuum pumps can be used for vacuum furnaces. Here’s a detailed explanation:

Vacuum furnaces are specialized heating systems used in various industries for heat treatment processes that require controlled environments with low or no atmospheric pressure. Vacuum pumps play a crucial role in creating and maintaining the vacuum conditions necessary for the operation of vacuum furnaces.

Here are some key points regarding the use of vacuum pumps in vacuum furnaces:

1. Vacuum Creation: Vacuum pumps are used to evacuate the furnace chamber, creating a low-pressure or near-vacuum environment. This is essential for the heat treatment processes carried out in the furnace, as it helps eliminate oxygen and other reactive gases, preventing oxidation or unwanted chemical reactions with the heated materials.

2. Pressure Control: Vacuum pumps provide the means to control and maintain the desired pressure levels within the furnace chamber during the heat treatment process. Precise pressure control is necessary to achieve the desired metallurgical and material property changes during processes such as annealing, brazing, sintering, and hardening.

3. Contamination Prevention: By removing gases and impurities from the furnace chamber, vacuum pumps help prevent contamination of the heated materials. This is particularly important in applications where cleanliness and purity of the processed materials are critical, such as in the aerospace, automotive, and medical industries.

4. Rapid Cooling: Some vacuum furnace systems incorporate rapid cooling capabilities, known as quenching. Vacuum pumps assist in facilitating the rapid cooling process by removing the heat generated during quenching, ensuring efficient cooling and minimizing distortion or other unwanted effects on the treated materials.

5. Process Flexibility: Vacuum pumps provide flexibility in the type of heat treatment processes that can be performed in vacuum furnaces. Different heat treatment techniques, such as vacuum annealing, vacuum brazing, or vacuum carburizing, require specific pressure levels and atmospheric conditions that can be achieved and maintained with the use of vacuum pumps.

6. Vacuum Pump Types: Different types of vacuum pumps can be used in vacuum furnaces, depending on the specific requirements of the heat treatment process. Commonly used vacuum pump technologies include oil-sealed rotary vane pumps, dry screw pumps, diffusion pumps, and cryogenic pumps. The choice of vacuum pump depends on factors such as required vacuum level, pumping speed, reliability, and compatibility with the process gases.

7. Maintenance and Monitoring: Proper maintenance and monitoring of vacuum pumps are essential to ensure their optimal performance and reliability. Regular inspections, lubrication, and replacement of consumables (such as oil or filters) are necessary to maintain the efficiency and longevity of the vacuum pump system.

8. Safety Considerations: Operating vacuum furnaces with vacuum pumps requires adherence to safety protocols. This includes proper handling of potentially hazardous gases or chemicals used in the heat treatment processes, as well as following safety guidelines for operating and maintaining the vacuum pump system.

Overall, vacuum pumps are integral components of vacuum furnaces, enabling the creation and maintenance of the required vacuum conditions for precise and controlled heat treatment processes. They contribute to the quality, consistency, and efficiency of the heat treatment operations performed in vacuum furnaces across a wide range of industries.

vacuum pump

Considerations for Selecting a Vacuum Pump for Cleanroom Applications

When it comes to selecting a vacuum pump for cleanroom applications, several considerations should be taken into account. Here’s a detailed explanation:

Cleanrooms are controlled environments used in industries such as semiconductor manufacturing, pharmaceuticals, biotechnology, and microelectronics. These environments require strict adherence to cleanliness and particle control standards to prevent contamination of sensitive processes or products. Selecting the right vacuum pump for cleanroom applications is crucial to maintain the required level of cleanliness and minimize the introduction of contaminants. Here are some key considerations:

1. Cleanliness: The cleanliness of the vacuum pump is of utmost importance in cleanroom applications. The pump should be designed and constructed to minimize the generation and release of particles, oil vapors, or other contaminants into the cleanroom environment. Oil-free or dry vacuum pumps are commonly preferred in cleanroom applications as they eliminate the risk of oil contamination. Additionally, pumps with smooth surfaces and minimal crevices are easier to clean and maintain, reducing the potential for particle buildup.

2. Outgassing: Outgassing refers to the release of gases or vapors from the surfaces of materials, including the vacuum pump itself. In cleanroom applications, it is crucial to select a vacuum pump with low outgassing characteristics to prevent the introduction of contaminants into the environment. Vacuum pumps specifically designed for cleanroom use often undergo special treatments or use materials with low outgassing properties to minimize this effect.

3. Particle Generation: Vacuum pumps can generate particles due to the friction and wear of moving parts, such as rotors or vanes. These particles can become a source of contamination in cleanrooms. When selecting a vacuum pump for cleanroom applications, it is essential to consider the pump’s particle generation level and choose pumps that have been designed and tested to minimize particle emissions. Pumps with features like self-lubricating materials or advanced sealing mechanisms can help reduce particle generation.

4. Filtration and Exhaust Systems: The filtration and exhaust systems associated with the vacuum pump are critical for maintaining cleanroom standards. The vacuum pump should be equipped with efficient filters that can capture and remove any particles or contaminants generated during operation. High-quality filters, such as HEPA (High-Efficiency Particulate Air) filters, can effectively trap even the smallest particles. The exhaust system should be properly designed to ensure that filtered air is released outside the cleanroom or passes through additional filtration before being reintroduced into the environment.

5. Noise and Vibrations: Noise and vibrations generated by vacuum pumps can have an impact on cleanroom operations. Excessive noise can affect the working environment and compromise communication, while vibrations can potentially disrupt sensitive processes or equipment. It is advisable to choose vacuum pumps specifically designed for quiet operation and that incorporate measures to minimize vibrations. Pumps with noise-dampening features and vibration isolation systems can help maintain a quiet and stable cleanroom environment.

6. Compliance with Standards: Cleanroom applications often have specific industry standards or regulations that must be followed. When selecting a vacuum pump, it is important to ensure that it complies with relevant cleanroom standards and requirements. Considerations may include ISO cleanliness standards, cleanroom classification levels, and industry-specific guidelines for particle count, outgassing levels, or allowable noise levels. Manufacturers that provide documentation and certifications related to cleanroom suitability can help demonstrate compliance.

7. Maintenance and Serviceability: Proper maintenance and regular servicing of vacuum pumps are essential for their reliable and efficient operation. When choosing a vacuum pump for cleanroom applications, consider factors such as ease of maintenance, availability of spare parts, and access to service and support from the manufacturer. Pumps with user-friendly maintenance features, clear service instructions, and a responsive customer support network can help minimize downtime and ensure continued cleanroom performance.

In summary, selecting a vacuum pump for cleanroom applications requires careful consideration of factors such as cleanliness, outgassing characteristics, particle generation, filtration and exhaust systems, noise and vibrations, compliance with standards, and maintenance requirements. By choosing vacuum pumps designed specifically for cleanroom use and considering these key factors, cleanroom operators can maintain the required level of cleanliness and minimize the risk of contamination in their critical processes and products.

vacuum pump

Can Vacuum Pumps Be Used in Food Processing?

Yes, vacuum pumps are widely used in food processing for various applications. Here’s a detailed explanation:

Vacuum pumps play a crucial role in the food processing industry by enabling the creation and maintenance of vacuum or low-pressure environments. They offer several benefits in terms of food preservation, packaging, and processing. Here are some common applications of vacuum pumps in food processing:

1. Vacuum Packaging: Vacuum pumps are extensively used in vacuum packaging processes. Vacuum packaging involves removing air from the packaging container to create a vacuum-sealed environment. This process helps extend the shelf life of food products by inhibiting the growth of spoilage-causing microorganisms and reducing oxidation. Vacuum pumps are used to evacuate the air from the packaging, ensuring a tight seal and maintaining the quality and freshness of the food.

2. Freeze Drying: Vacuum pumps are essential in freeze drying or lyophilization processes used in food processing. Freeze drying involves removing moisture from food products while they are frozen, preserving their texture, flavor, and nutritional content. Vacuum pumps create a low-pressure environment that allows frozen water to directly sublimate from solid to vapor, resulting in the removal of moisture from the food without causing damage or loss of quality.

3. Vacuum Cooling: Vacuum pumps are utilized in vacuum cooling processes for rapid and efficient cooling of food products. Vacuum cooling involves placing the food in a vacuum chamber and reducing the pressure. This lowers the boiling point of water, facilitating the rapid evaporation of moisture and heat from the food, thereby cooling it quickly. Vacuum cooling helps maintain the freshness, texture, and quality of delicate food items such as fruits, vegetables, and bakery products.

4. Vacuum Concentration: Vacuum pumps are employed in vacuum concentration processes in the food industry. Vacuum concentration involves removing excess moisture from liquid food products to increase their solids content. By creating a vacuum, the boiling point of the liquid is reduced, allowing for gentle evaporation of water while preserving the desired flavors, nutrients, and viscosity of the product. Vacuum concentration is commonly used in the production of juices, sauces, and concentrates.

5. Vacuum Mixing and Deaeration: Vacuum pumps are used in mixing and deaeration processes in food processing. In the production of certain food products such as chocolates, confectioneries, and sauces, vacuum mixing is employed to remove air bubbles, achieve homogeneity, and improve product texture. Vacuum pumps aid in the removal of entrapped air and gases, resulting in smooth and uniform food products.

6. Vacuum Filtration: Vacuum pumps are utilized in food processing for vacuum filtration applications. Vacuum filtration involves separating solids from liquids or gases using a filter medium. Vacuum pumps create suction that draws the liquid or gas through the filter, leaving behind the solid particles. Vacuum filtration is commonly used in processes such as clarifying liquids, removing impurities, and separating solids from liquids in the production of beverages, oils, and dairy products.

7. Marinating and Brining: Vacuum pumps are employed in marinating and brining processes in the food industry. By applying a vacuum to the marinating or brining container, the pressure is reduced, allowing the marinade or brine to penetrate the food more efficiently. Vacuum marinating and brining help enhance flavor absorption, reduce marinating time, and improve the overall taste and texture of the food.

8. Controlled Atmosphere Packaging: Vacuum pumps are used in controlled atmosphere packaging (CAP) systems in the food industry. CAP involves modifying the gas composition within food packaging to extend the shelf life and maintain the quality of perishable products. Vacuum pumps aid in the removal of oxygen or other unwanted gases from the package, allowing the introduction of a desired gas mixture that preserves the food’s freshness and inhibits microbial growth.

These are just a few examples of how vacuum pumps are used in food processing. The ability to create and control vacuum or low-pressure environments is a valuable asset in preserving food quality, enhancing shelf life, and facilitating various processing techniques in the food industry.

China Best Sales GEOWELL GWSP300 accelerators/synchrotrons oil free vacuum pump with Hot selling China Best Sales GEOWELL GWSP300 accelerators/synchrotrons oil free vacuum pump with Hot selling
editor by Dream 2024-05-14

China factory GWSP150 vortex pump equipment light weight portable small oilless dry oil-free electric air scroll lab vacuum pump with UK plug vacuum pump booster

Product Description

 

Product Description

GWSP Oil free Scroll Vacuum Pump

Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.

Basic informations:
1) Model: GWSP150 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 6.0Pa/0.06 mbar (abs.)
3) Max suction capacity: 50Hz-2.0L/s 60Hz-2.4L/s

Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
 

Technical Specifications

 

  Model GWSP40 GWSP75 GWSP150 GWSP300 GWSP600 GWSP1000
  Pumping Speed 50Hz l/s 0.5 1.0  2.0  4.3 8.7 16.6
m3/h 1.8 3.6 7.2 15.5 31.3 59.8
cfm 1.1 2.1 4.3 9.3 18.7 35.8
60Hz l/s 0.6 1.2 2.4 5.1 10.4 20.0 
m3/h 2.2 4.3 8.6 18.3 37.4 71.6
cfm 1.3 2.5 5.1 10.9 22.3 42.8
  Ultimate Pressure Torr   ≤1.1*10-1   ≤6.0*10-2   ≤4.5*10-2   ≤1.9*10-2   ≤7.5*10-3   ≤7.5*10-3
psi   ≤2.2*10-3   ≤1.2*10-3   ≤9.0*10-4   ≤3.8*10-4   ≤1.5*10-4   ≤1.5*10-4
Pa   ≤15   ≤8   ≤6   ≤2.6   ≤1   ≤1
mbar   ≤1.5*10-1   ≤8.0*10-2   ≤6.0*10-2   ≤2.6*10-2   ≤1.0*10-2   ≤1.0*10-2
  Noise Level dB(A)   ≤54   ≤57   ≤57   ≤60   ≤61   ≤65
  Leakage mbar·l/s 1*10-7
  Max. Inlet/Exhaust Pressure MPa 0.1 / 0.13
  Ambient Operation Temp. ºF 41~104
  Motor 1 phase Power kW 0.25 0.55 0.55 0.55 0.75 —
Voltage V   110~115 (60Hz),200~230 (50Hz) —
Speed rpm 1425(50Hz),1725(60Hz) —
Plug   North America, Europe, UK/Ireland, India —
  Motor 3 phase Power kW — 0.55 0.55 0.55 0.75 1.5
Voltage V — 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz)
Speed rpm —      1425 (50Hz),1725 (60Hz)
  Inlet/Exhaust Flange   KF25/KF16 KF40/KF16 KF40/KF16*2
  Dimensions 1 phase mm 326*212*253 450*260*296 455*260*296 493*297*334 538*315*348 —
3 phase mm — 450*260*296 455*260*296 493*297*334 538*315*348 576*450*402
  Net Weight 1 phase kg 15 21 22 29 36 —
3 phase kg — 20 21 28 31 54
  Cooling Type   Air cooled
  Others   With air flush

Features & Benefits

 

No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance

 

 

 

Quality Control

CMM inspection system assures
fixed tolarance on dimension&shape

Pump Testing

Applications

Analyzing instrument and device.
Spectroscopy/scHangZhou electron microscopy.
Space environment simulation machine.
Helium Leak detector.
Mass spectrometer.
Cryopump regeneration.
Accelerators/synchrotrons.

Food and drug industry.
Freezing dryer.
Vacuum storage.
Medical equipment
Low temperature plasma sterilizer.
Vacuum storage.
Dental equipment.

Vacuum equipment.
Oil free ultrahigh vacuum unit
Oil free vacuum unit

 

Related Products

 

GWT25 Foreline Filter
Performance: Filter out the dust particles contained in the intake gas.
Application: Vacuum coating, food and drug processing, ceramic and glass manufacturing, vacuum CHINAMFG and vacuum packaging systems.

 

GWS16 Exhaust Silencer
Performance: Reduce exhaust noise from oil-free vacuum systems.
Application: Installation of oil free scroll vacuum pumps requires a quiet vacuum system.

 

GWMMK150 Major Maintenance Kit
Performance: Prolong the service life of the product.
Application: For the major maintenance of oil free scroll vacuum pump GWSP150.

 

GWTSK150 Tip Seal Kit
Performance: Prolong the service life of the product.
Application: For the scheduled maintenance of oil free scroll vacuum pump GWSP150.

 

Company Profile

GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.

FAQ

Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Year
Oil or Not: Oil Free
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

small vacuum pump

Are there any notable brands or manufacturers of reliable small vacuum pumps?

Yes, there are several reputable brands and manufacturers known for producing reliable small vacuum pumps that are widely used in various industries and applications. Here are some notable brands in the world of small vacuum pumps:

1. Welch (Gardner Denver):

Welch, a brand under the Gardner Denver umbrella, is well-regarded for its high-quality laboratory vacuum pumps. They offer a range of oil-free and oil-lubricated pumps designed for applications like filtration, aspiration, and rotary evaporation.

2. KNF Neuberger:

KNF Neuberger specializes in diaphragm pumps and other small vacuum solutions. Their pumps are widely used in laboratory equipment, medical devices, and various industrial applications.

3. VACUUBRAND:

VACUUBRAND is a leading manufacturer of laboratory vacuum pumps and systems. They offer a comprehensive range of oil-free and oil-lubricated pumps, as well as vacuum controllers and accessories.

4. Pfeiffer Vacuum:

Pfeiffer Vacuum is known for its vacuum technology solutions, including compact and high-performance vacuum pumps. They serve a wide range of industries, including semiconductor manufacturing and research.

5. Edwards Vacuum:

Edwards Vacuum provides vacuum and abatement solutions for various industries. Their small vacuum pumps are used in applications like analytical instruments and research equipment.

6. Gast Manufacturing (IDEX Corporation):

Gast Manufacturing, part of the IDEX Corporation, offers a variety of small vacuum pumps and compressors. They are commonly used in medical devices, laboratory equipment, and environmental monitoring instruments.

7. Leybold:

Leybold is a global manufacturer of vacuum pumps and systems for industrial and research applications. They offer a range of small vacuum pumps designed for efficiency and reliability.

8. Becker Pumps:

Becker Pumps is known for its rotary vane vacuum pumps and compressors. Their compact and durable pumps are utilized in medical, laboratory, and industrial settings.

9. Agilent Technologies:

Agilent Technologies provides vacuum solutions, including small vacuum pumps, for analytical instrumentation and scientific research. Their pumps are known for precision and performance.

10. Busch Vacuum Solutions:

Busch Vacuum Solutions offers a wide range of vacuum pumps and systems for diverse industries, including pharmaceuticals, packaging, and laboratory applications.

These brands have established a reputation for producing reliable and efficient small vacuum pumps. When selecting a vacuum pump for a specific application, it’s important to consider factors such as the pump’s compatibility with your requirements, technical specifications, and after-sales support offered by the manufacturer.

Keep in mind that the suitability of a particular brand or model may vary depending on the application, so it’s advisable to consult with the manufacturer or a trusted supplier to choose the best small vacuum pump for your needs.

small vacuum pump

What safety precautions should be followed when using small vacuum pumps?

Working with small vacuum pumps involves potential risks, and it’s crucial to follow safety precautions to protect personnel, equipment, and the environment. Here are important safety measures to consider when using small vacuum pumps:

1. Read the Manual:

Always read and thoroughly understand the manufacturer’s operating manual for the specific vacuum pump you are using. The manual provides essential information on safe operation, maintenance, and troubleshooting.

2. Proper Ventilation:

Ensure that the area where the vacuum pump is operated is well-ventilated. Some pumps may produce fumes, heat, or exhaust gases that need proper ventilation to dissipate. Adequate ventilation also helps prevent overheating.

3. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles, gloves, lab coats, or other protective clothing, depending on the nature of the materials or substances being handled and the risks involved.

4. Electrical Safety:

If the vacuum pump is electrically powered, ensure that the electrical connections and cords are in good condition. Use ground fault circuit interrupters (GFCIs) when working with electrical equipment in wet or damp environments.

5. Leak Detection:

Regularly check for vacuum system leaks using a leak detector or soapy water solution. Leaks can compromise the vacuum level and may release hazardous gases or vapors into the environment.

6. Gas Compatibility:

Verify that the vacuum pump and its components are compatible with the gases or substances being processed. Incompatible materials can lead to chemical reactions, contamination, or equipment damage.

7. Emergency Shut-Off:

Ensure that an emergency shut-off mechanism or switch is easily accessible. Familiarize yourself with its location and how to use it in case of an emergency or equipment malfunction.

8. Secure Positioning:

Properly secure the vacuum pump to prevent it from tipping over or falling during operation. Use mounting brackets or secure it to a stable surface as needed.

9. Training and Supervision:

Ensure that personnel operating the vacuum pump are adequately trained and supervised, especially in laboratory, industrial, or medical settings. Training should cover safe operation, emergency procedures, and equipment-specific protocols.

10. Pressure Relief:

Install pressure relief valves or mechanisms to prevent over-pressurization of the system. This is particularly important when handling gases or vapors that can generate excessive pressure.

11. Regular Maintenance:

Adhere to the recommended maintenance schedule for the vacuum pump. Proper maintenance helps prevent equipment failures and unsafe conditions.

12. Emergency Response:

Have an emergency response plan in place, including knowledge of how to shut down the vacuum pump and evacuate the area in case of a hazardous situation.

13. Labels and Signage:

Clearly label the vacuum pump and associated equipment with safety instructions, warnings, and hazard information. This helps remind users of proper procedures and potential risks.

Always prioritize safety when using small vacuum pumps, and be aware of the specific risks associated with your application. Following these precautions helps mitigate potential hazards and ensures the safe operation of the equipment.

small vacuum pump

How does the size of a vacuum pump affect its performance and capacity?

The size of a vacuum pump has a significant impact on its performance and capacity, and it is a crucial factor to consider when selecting a vacuum pump for a specific application. Here’s how size influences a vacuum pump’s characteristics:

1. Pumping Speed:

The pumping speed of a vacuum pump is a measure of how quickly it can remove gas from a vacuum chamber. Larger vacuum pumps typically have higher pumping speeds, meaning they can evacuate air from a volume more rapidly. This is especially important in applications where a quick vacuum is required, such as in industrial processes.

2. Ultimate Vacuum:

The ultimate vacuum level that a vacuum pump can achieve depends on its size and design. Larger pumps can typically attain lower pressures, making them suitable for applications that require a high vacuum, such as in semiconductor manufacturing or analytical instruments.

3. Flow Rate:

The size of a vacuum pump influences the volume of gas it can handle per unit of time. Larger pumps have higher flow rates and can process larger volumes of gas, which is essential in applications like vacuum drying and vacuum packaging.

4. Capacity for Gas Loads:

Some applications generate high gas loads due to outgassing or the need to maintain a specific pressure. Larger vacuum pumps have a greater capacity to handle these gas loads without a significant drop in vacuum level, ensuring stable and consistent performance.

5. Power Consumption:

Larger vacuum pumps may require more power to operate, which can impact energy costs. In contrast, smaller pumps are often more energy-efficient. Selecting the right size ensures that the pump matches the available power supply and budget constraints.

6. Footprint and Space Requirements:

The physical size of a vacuum pump affects the space it occupies. Smaller pumps are more compact and may be preferred when space is limited, such as in laboratory settings or mobile applications.

7. Noise Level:

Larger vacuum pumps can generate more noise due to their higher capacity and power requirements. Smaller pumps, on the other hand, tend to operate more quietly, making them suitable for applications where noise reduction is essential.

8. Maintenance and Serviceability:

The size of a vacuum pump can impact ease of maintenance. Smaller pumps may have simpler designs, leading to easier servicing and reduced downtime.

It’s crucial to choose a vacuum pump size that aligns with the specific requirements of your application. Oversized pumps can lead to unnecessary energy consumption and higher upfront costs, while undersized pumps may struggle to meet performance demands, leading to decreased efficiency.

Overall, the size of a vacuum pump should be carefully selected based on the application’s vacuum level, flow rate, and gas handling requirements to optimize performance and efficiency.

China factory GWSP150 vortex pump equipment light weight portable small oilless dry oil-free electric air scroll lab vacuum pump with UK plug vacuum pump booster China factory GWSP150 vortex pump equipment light weight portable small oilless dry oil-free electric air scroll lab vacuum pump with UK plug vacuum pump booster
editor by Dream 2024-05-13

China Custom HP-295 Piston Oil Free Vacuum Pumps with 220V/110V Electric Motor vacuum pump ac system

Product Description

Product Description

Piston Oil Free Air Compressor Vacuum pump

OverviewSuoto piston vacuum pump is compact, light and attractive in design. It uses the big starting torque and is specially designed for low temperature environment. It is guaranteed start normally in winter’s low temperature. It is applicable to vacuum packaging, vacuum freezing, automobile reparation, gas analysis, medicine mechanism, printing mechanism and other vacuum evacuations.
This kind of pump is widely used in food packaging, scientific research, medical treatment, electronics, chemicals, medicine and laboratory of universities and colleges.

 

Technical Specifications

Model

HP-295

Voltage

220V/50HZ; 110V/60HZ

Free air displacement

60L/min

Ultimate Vacuum

700mmHg

Power

325w

Dimension

250x110x180mm

Using the environment

5-40ºC

Voltage resistance strength

1600V/50HZ 1min No breakdown

N.W.

6.5KG

Detailed Photos

Packaging & Shipping

 

Packing Details  : One pump in One plywood case
Delivery Details : 30 days after order confirmation

Standard package without original wood, no fumigation needed.

 

Company Profile

ZheZheJiang oto Pump Industrial Co., Ltd. is a professional pump manufacturer integrating R&D, manufacturing, sales and service as a whole, which has been certified by ISO9001 international quality management system. 

Located in Xihu (West Lake) Dis.a Industrial Park, ZheJiang , CHINAMFG Pump Industrial possesses 2 manufacturing bases in ZheJiang and ZHangZhoug. Since our inception, CHINAMFG Pump Industrial has been committed to the innovation and development of various pumps. Our leading products include self-priming trash pump, centrifugal pump, submersible pump, diaphragm pump, vacuum pump, diesel pump, fire pump, etc.

 

 

FAQ

Q: Can I chat with you online? What is your company official website?
 

Q: What type of company CHINAMFG is? 
A: CHINAMFG is a manufacture and trading company, has factories in ZheJiang and ZHangZhoug, with export and import license.

Q: What kinds of pumps do you supply?
A: Our products including self-priming trash pump, centrifugal pump, diaphragm pump, submersible pump, chemical pump, oil pump, diesel pump, fire fighting pump, etc.

Q: What is your payment terms?
A: Alibaba Trade Assurance, Western Union, Paypal, T/T, L/C, etc.

Q: Can you provide OEM, ODM service?
A: Yes. We have factories in ZheJiang and ZHangZhoug, we can make products according to your requirements.

Q: Why should we buy from you?
A: We are committed to provide best quality products at minimum delivery time and competitive price. We believe this is what customer wants. We are satified until customers are.

Q: What is your warranty period?
A: We provide 1 year of unconditional warranty on our products for the manufacturing defects.

Q: What about delivery time?
A: Normally our production time is within 2 weeks. Please confirm before order.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Acting Form: Single-Acting
Type: Centrifugal Pump
Displacement: Variable Pump
Performance: No Leak
Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Customization:
Available

|

small vacuum pump

How can one troubleshoot common issues that may arise with small vacuum pumps?

Troubleshooting common issues with small vacuum pumps is essential to maintain their efficiency and reliability. Here are steps to identify and address common problems:

1. Insufficient Vacuum:

If the pump fails to reach the desired vacuum level:

  • Check for leaks in the system using a leak detector or soapy water. Tighten connections or replace damaged seals.
  • Inspect the pump’s intake filter for clogs or dirt. Clean or replace the filter if necessary.
  • Ensure that the pump is properly sized for the application. An undersized pump may not achieve the required vacuum level.

2. Excessive Noise or Vibration:

If the pump is unusually noisy or vibrates excessively:

  • Inspect the pump’s mounting and foundation. Ensure it is securely fastened to a stable surface.
  • Check for loose or damaged components within the pump. Tighten or replace parts as needed.
  • Verify that the pump is properly lubricated, if applicable, and that the lubricant is at the correct level.

3. Overheating:

If the pump is overheating:

  • Ensure that the pump has adequate ventilation and is not placed in an excessively hot environment.
  • Check for blocked cooling fins or fans. Clean them to improve cooling efficiency.
  • Inspect the motor and electrical components for signs of overheating or damage. Address any electrical issues promptly.

4. Oil Contamination:

If the vacuum pump uses oil lubrication and there is oil contamination in the vacuum chamber:

  • Inspect the oil seals and gaskets for wear or damage. Replace them if necessary.
  • Check the oil level in the pump and maintain it within the recommended range.
  • Ensure that the oil used is compatible with the pump and the application.

5. Pump Won’t Start:

If the pump fails to start:

  • Check the power supply and ensure that the pump is properly connected to a functioning electrical outlet or power source.
  • Inspect the motor and electrical components for loose connections or damaged wires. Address any electrical issues.
  • Review the pump’s user manual for specific troubleshooting steps related to starting issues.

6. Reduced Flow Rate:

If the pump’s flow rate decreases:

  • Inspect the intake filter for clogs or contamination. Clean or replace the filter if necessary.
  • Check for wear on components like diaphragms or vanes. Replace worn parts to restore flow rate.
  • Verify that the pump’s valves and seals are functioning correctly. Replace faulty components.

Always consult the manufacturer’s user manual and guidelines for specific troubleshooting steps related to your small vacuum pump model. If issues persist or are beyond your expertise, contact the manufacturer’s customer support or a qualified technician for professional assistance.

small vacuum pump

Are small vacuum pumps known for their energy efficiency?

Small vacuum pumps are generally recognized for their energy efficiency when compared to larger, industrial-scale vacuum pumps. Their energy efficiency can vary depending on the type of pump, design, and application. Here’s an overview of the energy efficiency of small vacuum pumps:

1. Type of Vacuum Pump:

The energy efficiency of a small vacuum pump largely depends on its type. Some types of small vacuum pumps are inherently more energy-efficient than others. For example, diaphragm pumps and scroll pumps are known for their energy efficiency, especially when they operate in low-to-medium vacuum ranges.

2. Oil-Free Operation:

Small vacuum pumps that operate without the use of oil are typically more energy-efficient. Oil-free pumps eliminate the need for continuous oil changes and reduce the energy consumption associated with oil lubrication systems.

3. Variable Speed Drives:

Many modern small vacuum pumps feature variable speed drives (VSDs) or frequency converters. These systems allow the pump to adjust its speed and power consumption based on the required vacuum level. VSD-equipped pumps can significantly reduce energy consumption during periods of low demand.

4. Efficient Cooling:

Efficient cooling systems help maintain the pump’s temperature and prevent overheating. Proper cooling reduces energy waste and prolongs the life of the pump. Look for pumps with efficient cooling mechanisms.

5. Application-Specific Efficiency:

The energy efficiency of a small vacuum pump may vary depending on its application. Some pumps are designed for specific tasks or industries and may be optimized for energy efficiency in those contexts.

6. Size and Capacity:

The size of the vacuum pump should match the application’s capacity requirements. Using an appropriately sized pump ensures that energy is not wasted by operating an oversized pump for a smaller task.

7. Energy Consumption Ratings:

Check the manufacturer’s specifications and energy consumption ratings for the vacuum pump model you intend to use. This information provides insights into the pump’s efficiency and helps you make an informed choice.

8. Regular Maintenance:

Maintaining the pump according to the manufacturer’s recommendations is essential for preserving its energy efficiency. Regular maintenance prevents energy losses due to wear and malfunctions.

9. Energy-Saving Features:

Some small vacuum pumps are equipped with energy-saving features like automatic shut-off when not in use, sleep modes, or energy-efficient controls. These features contribute to reduced energy consumption.

Overall, small vacuum pumps are known for their energy efficiency compared to larger industrial vacuum systems. However, the specific level of efficiency can vary based on factors such as the pump type, design, and how well it matches the application’s requirements. To maximize energy efficiency, it’s important to select the right pump for your needs and implement proper maintenance and operational practices.

small vacuum pump

Are small vacuum pumps suitable for portable or handheld devices?

Small vacuum pumps are indeed suitable for integration into portable or handheld devices across various industries. Their compact size, lightweight design, and energy efficiency make them valuable components for creating portable systems that require vacuum or pressure control. Here’s why small vacuum pumps are well-suited for such applications:

1. Compact Size:

Small vacuum pumps are specifically designed to be compact, allowing for easy integration into portable or handheld devices without significantly increasing the overall size or weight of the system. This is advantageous for applications where portability is a priority.

2. Lightweight Design:

The lightweight construction of small vacuum pumps makes them ideal for portable devices that may need to be carried or operated by hand. This is particularly important in fields like healthcare, where handheld medical devices require precise vacuum control.

3. Low Power Consumption:

Many small vacuum pumps are energy-efficient, consuming minimal power while still delivering reliable performance. This is crucial for battery-powered or portable devices, as it helps extend the device’s operational life between charges or battery replacements.

4. Oil-Free Operation:

Several small vacuum pump types, such as diaphragm pumps, operate without the need for oil lubrication. Oil-free operation eliminates the risk of oil contamination in the device, making them suitable for sensitive applications like analytical instruments and cleanroom equipment.

5. Quiet Operation:

Some small vacuum pumps, like diaphragm and scroll pumps, operate quietly. This is beneficial in devices used in noise-sensitive environments, such as medical settings or research laboratories.

6. Versatility:

Small vacuum pumps are versatile and can be customized to meet specific application requirements. They can be integrated into a wide range of handheld devices, including vacuum aspiration systems, sample concentrators, and point-of-care diagnostic devices.

7. Precision Control:

Small vacuum pumps offer precise control over vacuum levels, making them suitable for applications where accuracy is critical, such as in medical suction devices, where the vacuum level must be carefully controlled to avoid tissue damage.

8. Integration Flexibility:

Manufacturers can easily integrate small vacuum pumps into the design of portable devices, ensuring a seamless and efficient solution for end-users. This integration flexibility allows for the creation of compact and user-friendly devices.

In summary, small vacuum pumps are well-suited for use in portable or handheld devices due to their compact size, low power consumption, versatility, and precise control capabilities. Their integration into such devices enhances their functionality and enables innovative solutions in fields such as healthcare, environmental monitoring, and point-of-care diagnostics.

China Custom HP-295 Piston Oil Free Vacuum Pumps with 220V/110V Electric Motor vacuum pump ac system China Custom HP-295 Piston Oil Free Vacuum Pumps with 220V/110V Electric Motor vacuum pump ac system
editor by Dream 2024-05-13